2262054 SENDER AS-FUEL LEVEL Caterpillar parts
CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E
Rating:
Alternative (cross code) number:
CA2262054
226-2054
2262054
CA2262054
226-2054
2262054
Weight: 0.38 pounds 0 kg.
VIBRATORY COMPACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
For WP2183003 Thimble Freezer Comp. fits Refrigerator 2183003 2262054 450...
20 SECOND SOAP For WP2183003 Thimble Freezer Comp. fits Refrigerator 2183003 2262054 450... || Ensure precise fit and functionality with WP2183003 thimble freezer component compatible with refrigerators using MPN 2183003 and 2262054. || Upgrade your refrigerator with the freezer component designed to replace 450... MPN, ensuring efficient performance. || Upgrade your kitchen experience! Keep your tools performing flawlessly with our high-quality accessories. Verify dimensions and photos for accurate compatibility. || For the perfect choice, always check the product’s dimensions and photos to ensure the ideal match for your needs.
20 SECOND SOAP For WP2183003 Thimble Freezer Comp. fits Refrigerator 2183003 2262054 450... || Ensure precise fit and functionality with WP2183003 thimble freezer component compatible with refrigerators using MPN 2183003 and 2262054. || Upgrade your refrigerator with the freezer component designed to replace 450... MPN, ensuring efficient performance. || Upgrade your kitchen experience! Keep your tools performing flawlessly with our high-quality accessories. Verify dimensions and photos for accurate compatibility. || For the perfect choice, always check the product’s dimensions and photos to ensure the ideal match for your needs.
Number on catalog scheme:
11
For full view, you need register
Compatible equipment models: 2262054:
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00736969
Install valve caps (3) on the end of each valve stem.
Install eight pushrods (4) in the cylinder head.Note: Ensure that the pushrods are installed in the original location. Also, ensure that the pushrods are seated in the valve lifters correctly.
Illustration 2 g00736820
Place the rocker shaft assembly in position on the cylinder head.
Install the five head bolts (1) through the rocker shaft. When you torque the head bolts start from the center and work toward the outside.Note: Place a punch mark on top of the head bolt. Replace the head bolts if the head bolts have more than two punch marks on top of the bolt.Reference: For further information concerning the cylinder head bolt torque, refer to Disassembly and Assembly, RENR4010, "Cylinder Head and Valve Mechanism".
Adjust the inlet valve lash and the exhaust valve lash to 0.4 mm (0.016 inch). Reference: Refer to Disassembly and Assembly, RENR4010, "Inspecting and Adjusting Valve Clearances" for more information on setting the valve lash.
After the engine valve lash adjustment, tighten the locknut for the adjustment screws (2) .End By: Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00736969
Install valve caps (3) on the end of each valve stem.
Install eight pushrods (4) in the cylinder head.Note: Ensure that the pushrods are installed in the original location. Also, ensure that the pushrods are seated in the valve lifters correctly.
Illustration 2 g00736820
Place the rocker shaft assembly in position on the cylinder head.
Install the five head bolts (1) through the rocker shaft. When you torque the head bolts start from the center and work toward the outside.Note: Place a punch mark on top of the head bolt. Replace the head bolts if the head bolts have more than two punch marks on top of the bolt.Reference: For further information concerning the cylinder head bolt torque, refer to Disassembly and Assembly, RENR4010, "Cylinder Head and Valve Mechanism".
Adjust the inlet valve lash and the exhaust valve lash to 0.4 mm (0.016 inch). Reference: Refer to Disassembly and Assembly, RENR4010, "Inspecting and Adjusting Valve Clearances" for more information on setting the valve lash.
After the engine valve lash adjustment, tighten the locknut for the adjustment screws (2) .End By: Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Caterpillar parts catalog:
Parts sender Caterpillar catalog:
CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E
1963830
SENDER GP-FUEL LEVEL
AP-655C
AP-655C
1943425
SENDER AS-FUEL LEVEL
CB-434D, CS-323C
CB-434D, CS-323C
1996852
SENDER AS-FUEL LEVEL
CB-534D, CB-564D
CB-534D, CB-564D
CP-433E, CS-423E, CS-433E
1967193
SENDER AS-FUEL LEVEL
RM-250C
RM-250C
1842419
SENDER AS-LEVEL
CS-663E, CS-683E
CS-663E, CS-683E
3253231
SENDER AS-FUEL LEVEL
RM-300, RM-500
RM-300, RM-500
2396918
SENDER AS-FUEL LEVEL
RM-300, RM-500
RM-300, RM-500
2298951
SENDER AS-FUEL LEVEL
CB-214E
CB-214E
2395812
SENDER AS-FUEL LEVEL
CP-533E, CS-533E, CS-54
CP-533E, CS-533E, CS-54
CS-533E
CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E