2396918 SENDER AS-FUEL LEVEL Caterpillar parts
RM-300, RM-500
Rating:
Alternative (cross code) number:
CA2396918
239-6918
2396918
CA2396918
239-6918
2396918
Weight: 0.72 pounds 0 kg.
RECLAIMER MIXER,
Number on catalog scheme:
8
For full view, you need register
Information:
Delphi DP210
Illustration 1 g01276809
(1) O-ring
(2) Locking screw
(3) Washer
Illustration 2 g01276811
(4) Mounting bolt
Table 1
Specifications for the Fuel Injection Pump
Note: Parts that are inside of the fuel injection pump are only serviceable by an authorized Delphi dealer. Consult your parts book for the availability of external pump parts not related to the fuel pump settings and for the possibility of remanufacturing options.
Callout Quantity Part Specification Description
Note: Before the fuel pump is removed from the engine, the fuel pump shaft must be locked. The locking screw will prevent the shaft from rotating. Position the engine to TC compression stroke before tightening the locking screw. If the pump was removed prior to properly locking the shaft, the fuel pump will need to be timed by trained personnel.
- 1 Locking the shaft Loosen locking screw (2) and remove washer (3). Tighten the bolt to the following torque. Do not discard the washer. The washer will need to be reinstalled later. Torque to 15 N m (11.0634 lb ft)
- 1 Unlocking the shaft Loosen locking screw (2) and install the washer (3). Tighten the bolt to the following torque 12 N m (9 lb ft)
4 1 Tighten the mounting bolt Torque to 44 N m (32 lb ft)
- - Tighten the bolts that hold the fuel pump to the front housing Torque to 25 N m (18 lb ft)
Illustration 1 g01276809
(1) O-ring
(2) Locking screw
(3) Washer
Illustration 2 g01276811
(4) Mounting bolt
Table 1
Specifications for the Fuel Injection Pump
Note: Parts that are inside of the fuel injection pump are only serviceable by an authorized Delphi dealer. Consult your parts book for the availability of external pump parts not related to the fuel pump settings and for the possibility of remanufacturing options.
Callout Quantity Part Specification Description
Note: Before the fuel pump is removed from the engine, the fuel pump shaft must be locked. The locking screw will prevent the shaft from rotating. Position the engine to TC compression stroke before tightening the locking screw. If the pump was removed prior to properly locking the shaft, the fuel pump will need to be timed by trained personnel.
- 1 Locking the shaft Loosen locking screw (2) and remove washer (3). Tighten the bolt to the following torque. Do not discard the washer. The washer will need to be reinstalled later. Torque to 15 N m (11.0634 lb ft)
- 1 Unlocking the shaft Loosen locking screw (2) and install the washer (3). Tighten the bolt to the following torque 12 N m (9 lb ft)
4 1 Tighten the mounting bolt Torque to 44 N m (32 lb ft)
- - Tighten the bolts that hold the fuel pump to the front housing Torque to 25 N m (18 lb ft)
Caterpillar parts catalog:
Parts sender Caterpillar catalog:
2028532
SENDER GP
RM-250C, RM-300, RM-350B, RM-500, RR-250B
RM-250C, RM-300, RM-350B, RM-500, RR-250B
3253231
SENDER AS-FUEL LEVEL
RM-300, RM-500
RM-300, RM-500
2298951
SENDER AS-FUEL LEVEL
CB-214E
CB-214E
2395812
SENDER AS-FUEL LEVEL
CP-533E, CS-533E, CS-54
CP-533E, CS-533E, CS-54
CS-533E
CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E
CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E
1963830
SENDER GP-FUEL LEVEL
AP-655C
AP-655C
3235867
SENDER AS-FUEL LEVEL
CP-44, CP-54B, CP-68B, CP-74B, CS-44, CS-54B, CS-56B, CS-64B, CS-66B, CS-68B, CS-74B, CS-76B, CS-78B, CW-34
CP-44, CP-54B, CP-68B, CP-74B, CS-44, CS-54B, CS-56B, CS-64B, CS-66B, CS-68B, CS-74B, CS-76B, CS-78B, CW-34
2720021
SENDER AS-FUEL LEVEL
CD-54B, CP-56, CP-64, CP-76, CS-56, CS-64, CS-74
CD-54B, CP-56, CP-64, CP-76, CS-56, CS-64, CS-74
2741472
SENDER-FUEL LEVEL
AP-600D, AP-655D, BG600D, BG655D
AP-600D, AP-655D, BG600D, BG655D
2592024
SENDER-PRESSURE
PM-200
PM-200
2638420
SENDER AS-FUEL LEVEL
AP-1055D, BG-2455D, BG-260D
AP-1055D, BG-2455D, BG-260D
3253231
SENDER AS-FUEL LEVEL
RM-300, RM-500
RM-300, RM-500