SENDER AS-FUEL LEVEL 2712912 - Caterpillar

2712912 SENDER AS-FUEL LEVEL Caterpillar parts 246C, 256C, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2712912
271-2912
2712912

Caterpillar 2712912 SENDER AS-FUEL LEVEL

Weight: 0.50 pounds 0 kg.

Buy SENDER AS-FUEL LEVEL 2712912 Caterpillar genuine, new aftermarket tractor parts with delivery
COMPACT TRACK LOADER, SKID STEER LOADER,

This part in 2 request: Show. This information for suppliers only!

#82407 2712912

2017-08-02

#82402 2712912

2017-08-02

Compatible equipment models: 2712912:

COMPACT TRACK LOADER 279C 279C2 289C 289C2 299C

MULTI TERRAIN LOADER 277C 277C2 287C 287C2 297C

SKID STEER LOADER 246C 256C 262C 262C2 272C Caterpillar

Number on catalog scheme: 8

Caterpillar 2712912 Parts scheme SENDER AS-FUEL LEVEL

For full view, you need register

Information:

Illustration 11 g00370577
Remove bolts (12) and retainer (13) .
Illustration 12 g00370578
Remove shim pack (14) .
Illustration 13 g00370579
Illustration 14 g00370581
Install Tooling (B) in the hole of hub (15). Repeat this step for the two remaining holes, as shown.
Attach a hoist to the lifting slings. Carefully remove hub (15) and gear (16) as a unit. The combined weight of the hub and of the gear is 320 kg (705 lb).
Illustration 15 g00370582
Illustration 16 g00371054
Place the hub and the gear on wood blocks so that bearing cone (18) is facing upward.
Remove six bolts (17) that hold ring (19) in the groove of gear (16) .
Remove ring (19) from gear (16) .
Illustration 17 g00370583
Install Tooling (B) in the holes of hub (15) again, as shown.
Attach a hoist to the lifting slings. Carefully remove hub (15) from gear (16). The weight of the hub is 193 kg (425 lb).Note: The weight of the gear is 127 kg (280 lb).
Illustration 18 g00370584
Illustration 19 g00370585
Typical Example
To remove bearing cone (18) from hub (15), turn the hub onto the opposite side so that the bearing cone is facing downward, as shown.Note: Do not apply heat directly to the hub. Excessive heat may reduce the service life of the hub.
Use a torch to heat the bearing cone evenly around the circumference. Continue to heat the bearing cone until the bearing cone falls from the hub.
Illustration 20 g00370588
Secure Tooling (C) to wheel (4). Attach a hoist to Tooling (C) .
Use the hoist to carefully remove wheel (4) from spindle (20). The weight of the wheel is 430 kg (950 lb).
Illustration 21 g00370590
Use Tooling (C) to lower wheel (4) to a horizontal position, as shown.
Illustration 22 g00370591
Remove Duo-Cone seal (23) .
Use a hammer and a punch to remove bearing cups (21) and (22) .
Illustration 23 g00370613
Illustration 24 g00370585
Typical Example
Remove Duo-Cone seal (24) from spindle (20) .
To remove bearing cone (25) from spindle (20), turn the spindle onto the opposite side so that the bearing cone is facing downward, as shown.Note: Do not apply heat directly to the spindle. Excessive heat may reduce the service life of the spindle.
Use a torch to heat the bearing cone evenly around the circumference. Continue to heat the bearing cone until the bearing cone falls from the spindle.