SENDER AS-FUEL LEVEL 3235867 - Caterpillar

Illustration 1 g02575977
Table 1
Specification for 278-9293 Bucket Linkage Gp and 282-5540 Bucket Linkage Gp
Item Qty Part Specification Description
- All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all the pin bores and the bushings before assembly. After you assemble the bushings coat all the bores and the bushings with 5P-0960 Grease Cartridge.
1 1 248-7820 Pin Diameter is 69.85 0.04 mm (2.750 0.002 inch).
2 2 248-7835 Bushing Bore before assembly is 70.17 0.04 mm (2.763 0.002 inch).
Installation depth is 9.73 0.20 mm (0.383 0.008 inch).
3 4 235-7679 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lips of the lip type seals do not extend beyond the face of the boss.
4 2 229-1092 Bushing Install the bushing in the bore so that the part number of the bushing is facing outward.
Bore before assembly is 65.129 0.040 mm (2.5641 0.0015 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
5 2 248-7836 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lips of the lip type seals do not extend beyond the face of the boss.
6 1 Nut Position the nut (7) to the distance 0.5 mm (0.02 inch) past the end of the bolt. For locking, tighten the nut (6) against the nut (7).
Torque to 175 30 N m (129 22 lb ft).
7 1 Nut
8 2 086-0523 Pin Diameter is 64.77 0.03 mm (2.550 0.001 inch).
9 6 096-4876 Nut Torque to 105 20 N m (77 15 lb ft).
10 - - During assembly of the linkage group on the machine, rotate the rod end of the bucket cylinder in order to position the grease fitting away from the stick.
11 1 7I-6843 Pin Diameter is 59.86 0.03 mm (2.357 0.001 inch).