3243641 SENDER AS-FUEL LEVEL Caterpillar parts
988H
Rating:
Alternative (cross code) number:
CA3243641
324-3641
3243641
CA3243641
324-3641
3243641
Weight: 2 pounds 1 kg.
WHEEL LOADER,
Compatible equipment models: 3243641:
Number on catalog scheme:
5
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 228-4583 Lifting Bracket 1 Start By:
Remove the tire and rim. Refer to Disassembly and Assembly, "Tire and Rim - Remove and Install".
Remove the axle shaft. Refer to Disassembly and Assembly, "Axle Shaft - Remove".Note: The following procedure is performed on the front axle. Each final drive and wheel has the same removal procedure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01206466
Install Tooling (A) and a suitable lifting device to final drive and wheel (1). The weight of final drive and wheel (1) is approximately 272 kg (600 lb).
Remove 16 nuts (2) and the washers. Remove final drive and wheel (1) .
Illustration 2 g01206467
Remove O-ring seal (3) .
Table 1
Required Tools
Tool Part Number Part Description Qty
A 228-4583 Lifting Bracket 1 Start By:
Remove the tire and rim. Refer to Disassembly and Assembly, "Tire and Rim - Remove and Install".
Remove the axle shaft. Refer to Disassembly and Assembly, "Axle Shaft - Remove".Note: The following procedure is performed on the front axle. Each final drive and wheel has the same removal procedure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01206466
Install Tooling (A) and a suitable lifting device to final drive and wheel (1). The weight of final drive and wheel (1) is approximately 272 kg (600 lb).
Remove 16 nuts (2) and the washers. Remove final drive and wheel (1) .
Illustration 2 g01206467
Remove O-ring seal (3) .
Caterpillar parts catalog:
Parts sender Caterpillar catalog:
2208214
SENDER AS-FUEL LEVEL
966G II, 966H, 972G II, 972H
966G II, 966H, 972G II, 972H
950F II, 960F, 966F, 966F II, 970F, 980G
1578858
SENDER AS-FUEL LEVEL
814F, 814F II, 815F, 815F II, 816F, 816F II, 980G, 980G II
814F, 814F II, 815F, 815F II, 816F, 816F II, 980G, 980G II
1152086
SENDER AS-FUEL LEVEL
814F, 815F, 816F, 980G
814F, 815F, 816F, 980G
3E8559
SENDER AS
936F
936F
916, 926, 936, G936, IT28
1248227
SENDER AS-LEVEL
980F, 980F II
980F, 980F II
3E5305
SENDER AS
980F
980F
9X4942
SENDER AS-FUEL LEVEL
950F, 950F II, 960F
950F, 950F II, 960F
9X4941
SENDER AS-FUEL LEVEL
966F, 966F II
966F, 966F II
2001138
SENDER AS-FUEL LEVEL
533, 543, 980H, AD30, HA770, HA771, HA870, HA871, TK370, TK371, TK380, TK381
533, 543, 980H, AD30, HA770, HA771, HA870, HA871, TK370, TK371, TK380, TK381
3243642
SENDER AS-FUEL LEVEL
980H, 980K, 980K HLG, AD30
980H, 980K, 980K HLG, AD30