SENDER AS-FUEL LEVEL 3246677 - Caterpillar

Illustration 2 g00770624
Pull floormat (1) away from cover (2) in order to expose the screws (3) .
Remove screws (3) and cover (2) .
Illustration 3 g00770627
Parking brake lever assembly (4) Clip (5) Pin (6) Cable (7) Clip
Remove clip (4) and pin (5). Squeeze clip (7) together. Pull cable (6) out of the parking brake assembly.
Illustration 4 g00770630
Remove three bolts (8) and parking brake lever assembly (9) .
Illustration 5 g00770705
The parking brake assembly is located on the rear drive shaft. (10) Clip (11) Pin (12) Circlip (13) Bolts and washers
Remove clip (10) and pin (11) .
Remove circlip (12). Separate the cable from the bracket.
Remove two bolts and washers (13) and remove the bracket.
Illustration 6 g00770708
Remove two bolts and washers (14). Remove caliper (15) .
Illustration 7 g00770715
Remove three bolts (16), three washers (17), and bracket (18) .
Remove the parking brake cable through the floorplate in the cab.Installation Procedure
Install the parking brake cable through the floorplate in the cab.
Illustration 8 g00770715
Install bracket (18), three washers (17), and three bolts (16) .
Illustration 9 g00770708
Install caliper (15). Install two bolts and washers (14) .
Illustration 10 g00770705
The parking brake assembly is located on the rear drive shaft. (10) Clip (11) Pin (12) Circlip (13) Bolts and washers
Install the bracket for the parking brake cable. Install two bolts and washers (13) which retain the bracket.
Insert the cable in the bracket. Install circlip (12) .
Install pin (11) and clip (10) in the cable assembly.
Illustration 11 g00770630
Install parking brake lever assembly (9) and install three bolts (8) .
Illustration 12 g00770627
Parking brake lever assembly (4) Clip (5) Pin (6) Cable (7) Clip
Install cable (6) in the parking brake assembly. Expand clip (7) .
Install pin (5) and clip (4) .
Illustration 13 g00770624
Illustration 14 g00754568
Install cover (2) and screws (3) .
Reposition floormat (1) .