SENDER AS-FUEL LEVEL 3638627 - Caterpillar

3638627 SENDER AS-FUEL LEVEL Caterpillar parts 938H, IT38H

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3638627
363-8627
3638627

Caterpillar 3638627 SENDER AS-FUEL LEVEL

Weight: 0.90 pounds 0 kg.

Buy SENDER AS-FUEL LEVEL 3638627 Caterpillar genuine, new aftermarket tractor parts with delivery
INTEGRATED TOOLCARRIER, WHEEL LOADER,

This part in 2 request: Show. This information for suppliers only!

#1571717 3638627

2025-08-13

#1417342 3638627

2024-09-04

Compatible equipment models: 3638627:

INTEGRATED TOOLCARRIER IT38H

WHEEL LOADER 938H Caterpillar

Number on catalog scheme: 12

Caterpillar 3638627 Parts scheme SENDER AS-FUEL LEVEL

For full view, you need register

Information:

start by:a) connection of anti-pivot link 1. Use tooling (A) to lift the rear of the machine to a height of approximately 40 in. (101.6 cm). Install tooling (B) in tooling (A). 2. Put wood blocks (1) between the rear axle housing and frame to hold the axle housing in position when the tire and rim are removed. 3. Fasten a hoist to the tire and rim. Remove nuts (3) and washers that hold the tire and rim. Remove tire and rim (2). The weight of the tire and rim is 1100 lb. (495 kg).Install Rear Tires And Rims
1. Fasten a hoist to the tire and rim. Put tire and rim (1) in position on the wheel assembly. Install the washers and nuts that hold the tire and rim. Tighten the nuts to a torque of 365 50 lb.ft. (490 70 N m).2. Remove the wood blocks from between the axle housing and frame.3. Use tooling (A) to lift the machine until tooling (B) can be removed. Lower the machine to the floor with tooling (A).end by:a) separation of anti-pivot link