SENDER AS-FUEL LEVEL 3644361 - Caterpillar

3644361 SENDER AS-FUEL LEVEL Caterpillar parts CB-22

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3644361
364-4361
3644361

Caterpillar 3644361 SENDER AS-FUEL LEVEL

Weight: 0.56 pounds 0 kg.

Buy SENDER AS-FUEL LEVEL 3644361 Caterpillar genuine, new aftermarket tractor parts with delivery
VIBRATORY COMPACTOR,

This part in 1 request: Show. This information for suppliers only!

#896012 3644361

2022-06-02

Compatible equipment models: 3644361:

VIBRATORY COMPACTOR CB-22 Caterpillar

Number on catalog scheme: 7

Caterpillar 3644361 Parts scheme SENDER AS-FUEL LEVEL

For full view, you need register

Information:

Illustration 1 g03330177
Table 1
Specification for 197-7180 Travel Motor Gp
Item Qty Part Specification Description
1 10 8T-4944 Bolt Torque to 177 18 N m (131 13 lb ft).
2 2 087-4743 Stop Torque to 140 14 N m (103 10 lb ft).
3 1 147-5860 Piston Lubricate the sliding surfaces lightly with 309-6932 Hydraulic Oil.
4 1 133-6777 Barrel Lubricate the sliding surfaces lightly with 309-6932 Hydraulic Oil.
5 Ensure that the following conditions are fulfilled during shims installation.
When parking brake release port (9) is vented to the air, the motor output shaft does not rotate with a torque of 785 N m (579 lb ft) or less.
When pressure at parking brake release port (9) is 780 kPa (113 psi), the motor output shaft rotates with a torque of 49 N m (36 lb ft) or less. Both the inlet port and the outlet port must be open to the hydraulic tank.
As required, use the following shims in order to adjust the height of springs for parking brake torque:
1 107-6981 Shim Thickness is 0.8 mm (0.03 inch).
1 107-6980 Shim Thickness is 1.0 mm (0.04 inch).
1 107-6976 Shim Thickness is 1.2 mm (0.05 inch).
1 107-6977 Shim Thickness is 1.4 mm (0.06 inch).
1 107-6978 Shim Thickness is 1.6 mm (0.06 inch).
1 107-6979 Shim Thickness is 1.8 mm (0.07 inch).
6 2 346-1340 Piston Lubricate the sliding surfaces lightly with 309-6932 Hydraulic Oil.
7 9 118-4057 Spring Length under test force is 31.0 mm (1.22 inch).
Test force is 360 36 N (81 8 lb).
Free length after test is 35.900 mm (1.4134 inch).
8 1 095-7380 Spring Length under test force is 13.0 mm (0.51 inch).
Test force is 14.3 1.5 N (3.2 0.3 lb).
Free length under test is 15.000 mm (0.5906 inch).
10 - - Apply blue Loctite high flex GM or white Loctite Low Breakloose between the mating surfaces of the 096-4376 Lip Type Seal and the body.
11 1 094-1882 Plug Apply blue Loctite high flex GM to the threads of the plug.
Torque to 13 2 N m (115 18 lb in).
The plug is not required for optional design for the body.
12 10 094-1882 Plug Apply blue Loctite high flex GM to the threads of the plug.
Torque to 13 2 N m (115 18 lb in).
13 1 7Y-4216 Spool Lubricate the sliding surfaces lightly with 309-6932 Hydraulic Oil.
14 1 096-3978 Spring Length under test force is 24.0 mm (0.94 inch).
Test force is 74 8 N (17 2 lb).
Free length after test is 34.700 mm (1.3661 inch).