1078139 SENSOR GP-PRESSURE Caterpillar parts
3176B, 3406E, 75C, 85C, C-10, C-12
Rating:
Alternative (cross code) number:
CA1078139
107-8139
1078139
CA1078139
107-8139
1078139
Weight: 0.21 pounds 0 kg.
CHALLENGER, TRUCK ENGINE,
Compatible equipment models: 1078139:
Number on catalog scheme:
20
For full view, you need register
Information:
Illustration 4 g01320438
(X) Upper Frame (Y) Boom (Z) Boom Foot Pin Assembly
Measure the total clearance between the boom and the upper frame at the bore for the boom foot pin assembly. The total clearance of Dimension (a) plus Dimension (b) must not be more than 0.80 mm (0.03 inch). If the total clearance is less than 0.80 mm (0.03 inch), the addition of shims between the boom and the upper frame will not be required. If the total clearance is more than 0.80 mm (0.03 inch), add the correct thickness of shims in order to obtain the required clearance.
Install the correct number of shims (21) .
Illustration 5 g01320335
Note: Apply a thin coat of Tooling (C) onto pin assembly (20) .
Install pin assembly (20) in the upper frame and in the boom.
Install bolt (19) in pin assembly (28). Tighten bolt (19) to a torque of 460 60 N m (340 44 lb ft).
Remove the suitable lifting device from the boom.
Illustration 6 g01320299
Pull hose assemblies (16) under the main control valve and install clamp (17) .
Illustration 7 g01320287
Connect hose assemblies (16) onto the back of the main control valve.
Illustration 8 g01320284
Connect harness assembly (15) .
Illustration 9 g01320279
Connect hose assemblies (14). Connect hose assemblies (13). Connect hose assemblies (12) .
Illustration 10 g01320252
Use a suitable lifting device in order to install hood (9) .
Illustration 11 g01320257
Illustration 12 g01320253
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install bolts (11) .
Connect struts (10) .
Lower hood (9) .
Illustration 13 g01320235
Position condenser (8) and install bolts (7) .
Illustration 14 g01320263
Use a suitable lifting device in order to raise boom cylinder (2). The weight of boom cylinder (2) is approximately 204 kg (450 lb). Use Tooling (B) and a suitable hammer in order to drive pin (6) into boom cylinder (2).
Illustration 15 g01320261
Install shims (5), retainer plate (4), and bolts (3) in order to secure boom cylinder (2). Tighten bolts (3) to a torque of 100 20 N m (75 15 lb ft).
Illustration 16 g01320260
Connect hose assembly (1) .
Repeat Step 17 through Step 19 for the remaining boom cylinder.End By: Install the stick. Refer to Disassembly and Assembly, "Stick - Install".
Caterpillar parts catalog:
Parts sensor Caterpillar catalog:
3176B, 3406E, 3508B, 3512B, 3516B, 75C, 85C, R1700 II
3176B, 3406E, 3508B, 3512B, 3516B, 5130B, 631E, 75C, 776D, 777D, 793C, 836, 85C, 992G, C-10, C-12, D10R, D9R
3126B, 3176, 3176B, 3176C, 3196, 3406B, 3406E, 3408B, 3412, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 75, C-10, C-12, C-9, C12, C15, C18, C30, C32, C7, C9, CPT372, SPP101
24H, 3176B, 3176C, 3196, 3406E, 3408E, 3412E, 345B, 345B II, 345B L, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 480, 5110B, 5130B, 5230B, 572R II, 631D, 631E, 631G, 633E II, 637E, 637...
120H, 120K, 120K 2, 120M, 12K, 12M, 135H, 140H, 140K, 140K 2, 140M, 14M, 160H, 160K, 160M, 16M, 24H, 24M, 3126, 3126B, 3126E, 3176B, 3176C, 3196, 322C, 322C FM, 325C, 325C FM, 3406E, 3408E, 3412E, 345...
3116, 3126B, 3176C, 3196, 3208, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C MH, 345D, 345D L, 345D L VG, 349D,...
3126B, 3176B, 3176C, 3196, 3406E, 3408E, 3412E, 3456, 3508B, 3512, 3512B, 3512C, 3516B, 3516C, C-10, C-12, C-15, C-16, C-9, C11, C13, C15, C18, C27, C32, C7, C9, C9.3, CX31-C13I, CX31-C15I, CX31-C18I,...
24H, 3176C, 3406E, 3408E, 3412E, 3456, 345B, 345B II, 345B L, 5110B, 5130B, 631E, 637E, 651E, 657E, 725, 730, 769C, 769D, 771D, 773B, 773D, 775D, 834B, 836, 844, 988F II, 990 II, 992C, C-12, C-15, C-1...
3176B, 3406E, 75C, 776C, 85C, C-10, C-12, G3306
3176, 3176B, 3406E, 75, 75C, 776C, 85C, C-10, C-12, R1700 II, R2900
3116, 3126, 3176B, 3176C, 3196, 3406E, 345B, 345B L, 480, 65E, 75C, 75E, 85C, 85E, 95E, C-10, C-12, G3306
3176B, 3176C, 3196, 3406E, 345B, 345B L, 480, 65E, 75C, 75E, 85C, 85E, 95E, C-10, C-12
3176, 3176B, 3406E, 75, 75C, 776C, 85C, C-10, C-12, R1700 II, R2900
3176B, 3406E, 75C, 776C, 85C, C-10, C-12, G3306
2251256
SENSOR GP-TEMPERATURE
65E, 75C, 75E, 85C, 85E, 95E
65E, 75C, 75E, 85C, 85E, 95E
1138819
SENSOR-TEMPERATURE
45, 55
45, 55
1470716
SENSOR
45, 55
45, 55
1138820
SENSOR-TEMPERATURE
45, 55
45, 55
312B L, 315B L, 322B L, 325B L, 330, 3304, 3304B, 3306, 3306B, 330B, 330B L, 3406B, 3406C, 3406E, 3408, 3408C, 3412, 3412C, 3456, 345B, 345B II, 345B II MH, 345B L, 3508, 3508B, 3508C, 3512, 3512B, 35...
9X5275
SENSOR GP-PRESSURE
3176B, 3176C, 3196, 3406E, 3408B, 3412, 65C, 65E, 75C, 75D, 75E, 85C, 85D, 85E, 95E, C-10, C-12
3176B, 3176C, 3196, 3406E, 3408B, 3412, 65C, 65E, 75C, 75D, 75E, 85C, 85D, 85E, 95E, C-10, C-12
1376363
SENSOR GP-SPEED
3176B, 75C, 85C
3176B, 75C, 85C
3176B, 3176C, 3196, 3406E, 345B, 345B L, 480, 5130B, 65E, 75C, 75E, 85C, 85E, 95E, C-10, C-12, R1700 II, R2900
3176B, 3176C, 3196, 3406E, 345B, 345B L, 480, 65E, 75C, 75E, 85C, 85E, 95E, C-10, C-12
3116, 3126, 3176B, 3176C, 3196, 3406E, 345B, 345B L, 480, 65E, 75C, 75E, 85C, 85E, 95E, C-10, C-12, G3306