SENSOR GP-POSITION 1745290 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     2P-8250     Strap Wrench     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00516824
Turn the fuel supply to the "OFF" position.
Disconnect hose assemblies (1) and (2) .
Use Tooling (A) to remove fuel filter (3) from the fuel filter base.
Remove the bolts that fasten the fuel filter base to the engine. Remove fuel filter base (4) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00516824
Install fuel filter base (4) on the engine.
Install fuel filter (3) on the fuel filter base. Follow the directions on the fuel filter for the correct installation procedure.
Connect hose assemblies (1) and (2) to the fuel filter base.
Turn the fuel supply to the "ON" position.
Remove the air from the system. Refer to Testing and Adjusting, "Fuel System - Prime".