2011071 SENSOR GP-TEMPERATURE Caterpillar parts
3126B, C7, C9
Rating:
Alternative (cross code) number:
CA2011071
201-1071
2011071
CA2011071
201-1071
2011071
GENERATOR SET, MARINE ENGINE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
car-wear Fiber Glass Eyebrow Eyelid Headlight Cover for Mitsubishi Lancer EVO X 10 Outlander B#
car-wear for Mitsubishi Lancer EVO X 10 Outlander B# || Fiber Glass || Glue or Double Sided Tape || Comes in both left and right side. || Light weight and durable, it can stand to any weather conditions.
car-wear for Mitsubishi Lancer EVO X 10 Outlander B# || Fiber Glass || Glue or Double Sided Tape || Comes in both left and right side. || Light weight and durable, it can stand to any weather conditions.
Cow Floral Car Trash Can,Waterproof Car Trash Bin Collapsible Portable Auto Garbage,Multipurpose Car Organizer Hanging S 2011071
FRMG Material: This car trash can is made of polyester fabric. Can be placed at will, suitable for various vehicles. Keep your car clean, organized and free of litter. Large capacity: Our car trash can has 2 different sizes, S(8.66x8.66x5.9in), M(11x11x5.9in). It is suitable for different needs and different models of cars. Large capacity, not only can be used to store and throw away wrapping paper, garbage, waste or garbage during travel, but also can be used as a storage bag for car accessories, || Large capacity: Our car trash can has 2 different sizes, S(8.66x8.66x5.9in), M(11x11x5.9in). It is suitable for different needs and different models of cars. Large capacity, not only can be used to store and throw away wrapping paper, garbage, waste or garbage during travel, but also can be used as a storage bag for car accessories, food and important documents. || Multiple ways of use: The PE board inside the trash can is supported, and the product can be placed on the floor of the car, the center console or hung on the seat back with a ribbon. || Easy to Clean: The inner lining of this garbage bag is made of PEVA material, which is leak-proof and waterproof, easy to clean and wash. It can be used directly or covered with garbage bags as a vehicle-mounted garbage bin. || Foldable: This car trash can can be folded when not in use for better storage and space-saving.
FRMG Material: This car trash can is made of polyester fabric. Can be placed at will, suitable for various vehicles. Keep your car clean, organized and free of litter. Large capacity: Our car trash can has 2 different sizes, S(8.66x8.66x5.9in), M(11x11x5.9in). It is suitable for different needs and different models of cars. Large capacity, not only can be used to store and throw away wrapping paper, garbage, waste or garbage during travel, but also can be used as a storage bag for car accessories, || Large capacity: Our car trash can has 2 different sizes, S(8.66x8.66x5.9in), M(11x11x5.9in). It is suitable for different needs and different models of cars. Large capacity, not only can be used to store and throw away wrapping paper, garbage, waste or garbage during travel, but also can be used as a storage bag for car accessories, food and important documents. || Multiple ways of use: The PE board inside the trash can is supported, and the product can be placed on the floor of the car, the center console or hung on the seat back with a ribbon. || Easy to Clean: The inner lining of this garbage bag is made of PEVA material, which is leak-proof and waterproof, easy to clean and wash. It can be used directly or covered with garbage bags as a vehicle-mounted garbage bin. || Foldable: This car trash can can be folded when not in use for better storage and space-saving.
Cow Floral Car Registration and Insurance Holder,Premium Leather Vehicle Glove Box Organizer,for Driver License, Cards & Essential Documents 2011071
FRMG High-quality Material:Registration and insurance card holder made of high-quality PU leather and durable vinyl PVC, the leather is soft,durable. || Transparent Inner Bag:You can easily find the car registration and Insurance holder , as well as various documents. || 6 Pockets: Car registration and insurance holder can help to organize the car document easily and quickly. The car document holder not only can keep your registration and insurance card，but also can keep your license, ID cards, AAA cards, business cards, receipt, and others. || Unique Pattern: Registration and insurance card holder are printed patterns on the outside, you can choose your favorite style. || Dimensions: 9.4" x 5.0". The slim profile and lightweight design is the perfect size for any glove box or console compartment, ideal for protecting your important documents. Also a great gift for yourself, your lover, friends and family.
FRMG High-quality Material:Registration and insurance card holder made of high-quality PU leather and durable vinyl PVC, the leather is soft,durable. || Transparent Inner Bag:You can easily find the car registration and Insurance holder , as well as various documents. || 6 Pockets: Car registration and insurance holder can help to organize the car document easily and quickly. The car document holder not only can keep your registration and insurance card，but also can keep your license, ID cards, AAA cards, business cards, receipt, and others. || Unique Pattern: Registration and insurance card holder are printed patterns on the outside, you can choose your favorite style. || Dimensions: 9.4" x 5.0". The slim profile and lightweight design is the perfect size for any glove box or console compartment, ideal for protecting your important documents. Also a great gift for yourself, your lover, friends and family.
Number on catalog scheme:
For full view, you need register
Information:
Start By:
Remove the Exhaust Elbow.
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Turn the fuel supply to the OFF position and turn the power disconnect switch to the OFF.
Illustration 1 g02151651
Disconnect clamp assembly (1).
Remove three bolts (3).
Remove bolt (4). Remove tube assembly (2) and the gasket.
Illustration 2 g02583797Note: Cap all tube assemblies and fittings that are disconnected to prevent fluid loss. This action will also keep contaminants out of the systems.
Disconnect tube assemblies (5) and (6). Plug tube assemblies (6) with Tooling (D).
Illustration 3 g02153363
Disconnect cable assembly (7) and cable assembly (8).
Remove allen bolt (9), the clamp assembly, and position cable assembly (10) out of the way.
Disconnect flame detection temperature sensor (11).
Illustration 4 g02153382
Remove nuts (16) and remove combustion head (15).
Remove gasket (14), tube assembly (13), and gasket (12).Note: The gaskets are for one time use only. Replace with new gaskets upon installation.
If required, remove studs (17).
Illustration 5 g02153383
Remove fittings (18) and (19).
Remove spark plug (20) and remove fitting (21).
Illustration 6 g02481277
Use Tooling (B) to remove O-ring seals (22) and (23) from cable assembly (10). Discard the O-ring seals.Installation Procedure
Install combustion head (15) in reverse order.
Apply Tooling (A) onto the threads of studs (17). Install the studs. Tighten studs (17) to a torque of 17 2 N m (150 18 lb in).
Apply Tooling (A) onto the threads of the studs and nuts (16). Tighten nuts (16) in a crisscross pattern to a torque of 23 3 N m (17 2 lb ft). Tighten nuts (16) again in a crisscross pattern to a torque of 28 3 N m (21 2 lb ft). Tighten nuts (16) again in a crisscross pattern to a torque of 28 3 N m (21 2 lb ft).
Use caution when you are using isopropyl alcohol. Avoid prolonged skin contact with isopropyl alcohol.Vapors may be harmful if inhaled. Use only in a well ventilated area. Do not smoke while using isopropyl alcohol.Isopropyl alcohol is flammable. Do not use near an open flame or near welding operations. Keep isopropyl alcohol away from heated surfaces exceeding 482°C (900°F).
Note: This connection is an electrical connection and cannot be lubricated with a petroleum-based lubricant. Isopropyl alcohol is the only approved lubrication for this connection.
Lubricate new O-ring seals (22) and (23) with Tooling (C) prior to installation.
Tighten fitting (21) to a torque of 60 6 N m (44 4 lb ft).
Tighten fittings (19) and (18) to a torque of 30 2 N m (266 18 lb in).
Tighten spark plug (20) to a torque of 57.5 4 N m (42 3lb ft).
Apply Tooling (A) to the threads of flame detection temperature
Remove the Exhaust Elbow.
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Turn the fuel supply to the OFF position and turn the power disconnect switch to the OFF.
Illustration 1 g02151651
Disconnect clamp assembly (1).
Remove three bolts (3).
Remove bolt (4). Remove tube assembly (2) and the gasket.
Illustration 2 g02583797Note: Cap all tube assemblies and fittings that are disconnected to prevent fluid loss. This action will also keep contaminants out of the systems.
Disconnect tube assemblies (5) and (6). Plug tube assemblies (6) with Tooling (D).
Illustration 3 g02153363
Disconnect cable assembly (7) and cable assembly (8).
Remove allen bolt (9), the clamp assembly, and position cable assembly (10) out of the way.
Disconnect flame detection temperature sensor (11).
Illustration 4 g02153382
Remove nuts (16) and remove combustion head (15).
Remove gasket (14), tube assembly (13), and gasket (12).Note: The gaskets are for one time use only. Replace with new gaskets upon installation.
If required, remove studs (17).
Illustration 5 g02153383
Remove fittings (18) and (19).
Remove spark plug (20) and remove fitting (21).
Illustration 6 g02481277
Use Tooling (B) to remove O-ring seals (22) and (23) from cable assembly (10). Discard the O-ring seals.Installation Procedure
Install combustion head (15) in reverse order.
Apply Tooling (A) onto the threads of studs (17). Install the studs. Tighten studs (17) to a torque of 17 2 N m (150 18 lb in).
Apply Tooling (A) onto the threads of the studs and nuts (16). Tighten nuts (16) in a crisscross pattern to a torque of 23 3 N m (17 2 lb ft). Tighten nuts (16) again in a crisscross pattern to a torque of 28 3 N m (21 2 lb ft). Tighten nuts (16) again in a crisscross pattern to a torque of 28 3 N m (21 2 lb ft).
Use caution when you are using isopropyl alcohol. Avoid prolonged skin contact with isopropyl alcohol.Vapors may be harmful if inhaled. Use only in a well ventilated area. Do not smoke while using isopropyl alcohol.Isopropyl alcohol is flammable. Do not use near an open flame or near welding operations. Keep isopropyl alcohol away from heated surfaces exceeding 482°C (900°F).
Note: This connection is an electrical connection and cannot be lubricated with a petroleum-based lubricant. Isopropyl alcohol is the only approved lubrication for this connection.
Lubricate new O-ring seals (22) and (23) with Tooling (C) prior to installation.
Tighten fitting (21) to a torque of 60 6 N m (44 4 lb ft).
Tighten fittings (19) and (18) to a torque of 30 2 N m (266 18 lb in).
Tighten spark plug (20) to a torque of 57.5 4 N m (42 3lb ft).
Apply Tooling (A) to the threads of flame detection temperature
Caterpillar SIS machinery equipment:
Caterpillar SIS
3126B Marine Engine 3GS00001-UP »
201-1071
SENSOR GP-TEMPERATURE
3126B Marine Engine 9ZF00001-UP »
201-1071
SENSOR GP-TEMPERATURE
C9 Marine Engine CSN00001-UP »
201-1071
SENSOR GP-TEMPERATURE
C9 Marine Engine C9B00001-UP »
201-1071
SENSOR GP-TEMPERATURE
C7 Marine Engine C7X00001-UP »
201-1071
SENSOR GP-TEMPERATURE
C9 Marine Auxiliary and Gen Set Engine C9A00001-UP »
201-1071
SENSOR GP-TEMPERATURE
C7 Marine Engine C7B00001-UP »
201-1071
SENSOR GP-TEMPERATURE
C9 Marine Generator Set SJB00001-UP »
201-1071
SENSOR GP-TEMPERATURE
C9 Marine Engine X9X00001-UP »
201-1071
SENSOR GP-TEMPERATURE
C9 Marine Engine Z9X00001-UP »
201-1071
SENSOR GP-TEMPERATURE
C9 Marine Auxiliary and Gen Set Engine C9Y00001-UP »
201-1071
SENSOR GP-TEMPERATURE
Parts sensor Caterpillar catalog:
140H, 143H, 14H, 14M, 160H, 163H, 16H, 16M, 3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D LN, 325C, 325C FM, 325D, 325D L, 330C, 330C FM, 330C L, 330C MH, 345C, 345C L, 345C MH, 365C, 365C L, 385C, 38...
3126B, 3176, 3176B, 3176C, 3196, 3406B, 3406E, 3408B, 3412, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 75, C-10, C-12, C-9, C12, C15, C18, C30, C32, C7, C9, CPT372, SPP101
3126B, 3176C, 3196, 3406E, 3408E, 3412C, 3412E, 3456, 3508B, 3508C, 3512, 3512B, 3512C, 3516B, 3516C, 785B, 789B, 793B, C-10, C-12, C-15, C-16, C-9, C11, C13, C15, C18, C27, C32, C7, C9, C9.3, CX31-C1...
3116, 3126B, 3176C, 3196, 3208, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C MH, 345D, 345D L, 345D L VG, 349D,...
120H, 135H, 140G, 140H, 140M, 14M, 160H, 16M, 24H, 24M, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D...
120H, 120K, 12H, 12K, 135H, 140G, 140K, 140K 2, 140M, 160K, 160M, 2290, 2390, 2391, 2491, 2590, 3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D...
120H, 120H ES, 120H NA, 12H ES, 12H NA, 135H, 135H NA, 140H ES, 140H NA, 143H, 160H ES, 160H NA, 163H NA, 3114, 3116, 3126, 3126B, 312C, 315C, 320B, 322B, 322B LN, 322C, 322C FM, 325B, 325B L, 325C, 3...
120H, 120K, 120K 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 2290, 2390, 2391, 2491, 2590, 2864C, 30/...
120H, 12H, 140H, 140M, 143H, 14H, 14M, 160H, 163H, 16H, 16M, 236B, 267B, 3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L...
120K, 12H, 12K, 140G, 140H, 140K, 140K 2, 140M, 143H, 14H, 160H, 160K, 160M, 163H, 16H, 2290, 2390, 2391, 2491, 2590, 3126B, 3126E, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM L...
1090, 1190, 1190T, 120K, 1290T, 12H, 12K, 140G, 140H, 140K, 140K 2, 140M, 143H, 14H, 160H, 160K, 160M, 163H, 16H, 2290, 2390, 2391, 2491, 2590, 3126B, 3126E, 324D, 324D FM, 324D FM LL, 324D L, 324D LN...
120K, 12H, 12K, 140G, 140K, 140K 2, 140M, 160K, 160M, 2290, 2390, 2391, 2491, 2590, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D...
1213362
SENSOR & MTG GP-RADIATOR
3508, 3508B, 3512, 3512B, 3516, 3516B
3508, 3508B, 3512, 3512B, 3516, 3516B
3176B, 3406E, 3508B, 3512B, 3516B, 5130B, 631E, 75C, 776D, 777D, 793C, 836, 85C, 992G, C-10, C-12, D10R, D9R
3694076
SENSOR GP-PRESSURE
C280-12, C280-16
C280-12, C280-16
2289852
SENSOR GP-PRESSURE
G3408, G3412, G3412C, G3508, G3512, G3516, G3520C
G3408, G3412, G3412C, G3508, G3512, G3516, G3520C
3176C, 3196, 3406E, 3456, 793D, 797, 797B, C-12, C12, C15, C18, C30, C32, C7, C9
3208, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3408, 3412, 3412C, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 793C, 854G, 992G, C15, C18, C9, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX35-C1...
2299985
SENSOR GP-TEMPERATURE
C11, C13, C15, C18, C27, C32, C7, C9, C9.3, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX35-C18I, CX35-P800, TH31-E61, TH35-C11I, TH35-C13I, TH35-C15I, TH48-E70
C11, C13, C15, C18, C27, C32, C7, C9, C9.3, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX35-C18I, CX35-P800, TH31-E61, TH35-C11I, TH35-C13I, TH35-C15I, TH48-E70
2787353
SENSOR GP-ENGINE
C175-16
C175-16
4183970
SENSOR GP-PRESSURE
844K, 990K
844K, 990K
4343633
SENSOR GP-PRESSURE
C280-12, C280-16
C280-12, C280-16
3508, 3508B, 3512, 3512B, 3516, 3516B, 5130B, 776D, 777D, 785C, 789C, 793C, 854G, 992G, 994D, D11R