SENSOR GP-PRESSURE 2076859 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00759022
Disconnect two fuel lines (1) from fuel transfer pump (2). Plug all openings immediately.
Remove four bolts (4) that mount fuel transfer pump (2) to the cylinder block.
Remove fuel transfer pump (2) and the gasket.Note: If it is difficult to remove the fuel transfer pump, rotate the crankshaft until the rocker arm of the fuel transfer pump is not under pressure.