SENSOR GP-PRESSURE 2289852 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01131579
Use Tooling (B) to clean the electronic unit injector bore.
Use Tooling (C) to clean the electronic unit injector seat.
Apply Tooling (E) to upper land (2) and lower land (3) on the electronic unit injector sleeve.
Illustration 2 g01016237
Position electronic unit injector sleeve (1) in the cylinder head assembly. Use Tooling (D) and a hammer to seat the sleeve.
Install the electronic unit injectors. Refer to Disassembly and Assembly , "Electronic Unit Injector - Install".
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the cooling system capacity. Refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC)