AVSPARE.COM
parts catalog

SENSOR GP-TEMP & PRESS 2500865 - Caterpillar



2500865 SENSOR GP-TEMP & PRESS Caterpillar parts C175-16, C175-20 SENSOR
Rating:
13
Alternative (cross code) number:
CA2500865
250-0865
2500865
Caterpillar 2500865 SENSOR GP-TEMP & PRESS

Buy SENSOR GP-TEMP & PRESS 2500865 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

Compatible equipment models: 2500865:

GENERATOR SET  C175-16   C175-20   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


To avoid injury do not stand on or between implement and machine while operating lift control.
Introduction
Illustration 4 g03383838
The 438-5467 Lifting Adapter is used to remove and install the hydraulic pump on the 336E-H Excavators.The 438-5467 Lifting Adapter has a working load limit of 362.87 kg (800 lb)
Table 1
438-5467 Lifting Adapter Specifications    
Dimensions    
215.9 x 203.2 x 152.4 mm (8.5 x 8.0 x 6.0 in)    
Material     Steel    
Working Load Limit (WLL)    
362.87 kg (800 lb)    
Weight    
7.71 kg (17 lb)    Note: Refer to the appropriate Disassembly and Assembly Service Manual for mounting and lifting hardware and correct location of the lifting point.References
Table 2
References    
UENR0190     336E-H Machine Systems Disassembly and Assembly    
Refer to SIS Web for additional updated material.    Note: The list of references may change frequently. Always locate and refer to the appropriate Disassembly and Assembly Service Manual for information on mounting and lifting hardware.Operation Section
Operation
Personal injury or death can result from lifting a heavy component.The heavy component can fall if using an incorrect hoist and/or sling or fastener to lift the load.Be sure the hoist and other devices have the correct lifting capacity to lift a heavy component. The approximate weight of the heavy component is given below.
Failure to comply to the rated load can cause possible personal injury or attachment damage.Review the rated load of a particular attachment before performing any operation. Make adjustments to the rated load as necessary.
The weight of the hydraulic pump is approximately 319.65 kg (704.70 lb ).
Identify the load and weight of the machine component to be lifted. Do not exceed the Working Load Limit (WLL) of 362.87 kg (800 lb).
Do not lift at any angle other than vertical as shown in the illustration.
Consider the center of gravity before removing machine component so shifting of tool does not occur.
To avoid injury do not stand on or between implement and machine while operating lift control.
Illustration 5 g03383914
Note: The WLL of the hoist or lifting device used for this step should be more than the weight of the machine component being lifted and all the tooling used to lift it.
Follow the information in the specific Disassembly and Assembly Service Manual for the machine component to be lifted.
Attach the plate to the lifting bracket using two 1-14 Grade 8 Bolts.
Tighten all bolts to standard torque.Inspection and Maintenance Section
Inspection
Inspect tooling prior to each use for damage, bending, nicks, burrs, dents, cracks, bent or worn parts. If damage is found, destroy the tool and dispose of as scrap. Replace damaged tool with new product.
Do not use unless the Working Load Limit (WLL) identification markings are legible.
Do not use if any holes are elongated or deformed.
Have the tool inspected annually by an approved dealership inspector.Cleaning
Clean the tooling using a non-solvent based cleaner.Storage
Store the tooling in a clean, dry location to prevent rust or corrosion. Tooling can be damaged by moisture or high humidity.
The tool should be stored in the most stable position. Store the tool

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts sensor Caterpillar catalog:

2746720 SENSOR GP-PRESSURE
3054E, 3056E, 311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315C, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 32...
1918304 SENSOR GP-SPEED
120K, 120K 2, 120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 420E, 420F, 428E, 428F, 430E, 430F, 432...
2380112 SENSOR GP-TEMPERATURE
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 226B, 232B, 236B, 236B3, 242B, 242B3, 246C, 247B, 252B3, 256C, 257B, 257B3, 25...
3203060 SENSOR-PRESSURE
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2384C, 2484C, 2570C, 2670C, 2864C, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR,...
3203061 SENSOR-PRESSURE
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2384C, 2484C, 2570C, 2670C, 2864C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320E, 320E L, 320E LN, 320E...
3203063 SENSOR GP-PRESSURE
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2384C, 2484C, 2570C, 2670C, 2864C, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR,...
1166680 SENSOR AS-SPEED
3054, 3056, 554, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, 914G, 924G, 924GZ, AP-650B, AP-800D, BG-225C, C175-16, C175-20, C3.3, C4.4, C6.6, C7.1, CB-434D, CB-534D...
1918305 SENSOR GP-SPEED
24M, 3606, 3608, 3612, 572R II, 583T, 587T, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 770G, 770G OEM, 772G, 772G OEM, 793F, 793F-XQ, 795F AC, 797, 797B, 797F, 966K, 966M XE, 972M XE, AD55, C15, C175...
2746719 SENSOR GP-PRESSURE
120K, 120K 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 2290, 2390, 2391, 2491, 24M, 2590, 2864C, 324D, 324D ...
2871866 SENSOR GP-PRESSURE
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2864C, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL, 586C, 627H, 627K, 627K LRC, 725C, 793F, 793...
2660136 SENSOR GP-PRESSURE
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA, C175...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.