2526361 SENSOR GP-POSITION Caterpillar parts
963D
Rating:
Alternative (cross code) number:
CA2526361
252-6361
2526361
CA2526361
252-6361
2526361
Weight: 1 pounds 0 kg.
TRACK LOADER,
Compatible equipment models: 2526361:
Number on catalog scheme:
10
For full view, you need register
Information:
Inspection
To maximize the engine performance, inspect the belts for wear and for cracking. Replace belts that are worn or damaged.For applications that require multiple drive belts, replace the belts in matched sets. Replacing only one belt of a matched set will cause the new belt to carry more load because the older belt is stretched. The additional load on the new belt could cause the new belt to break.If the belts are too loose, vibration causes unnecessary wear on the belts and pulleys. Loose belts may slip enough to cause overheating.To accurately check the belt tension, a suitable gauge should be used. Refer to the Disassembly and Assembly manual for the correct procedure. If a suitable gauge is not available, apply 45 N (10 lb ft) of force midway between the pulleys. A correctly adjusted belt will deflect 10 mm (0.39 inch).Adjustment
Illustration 1 g00994667
Typical example
(1) Adjusting bolts
(2) Mounting bolts
Loosen the mounting bolts (2) and the adjusting bolts (1).
Move the alternator in order to increase or decrease the belt tension.
Tighten the adjusting bolts (1). Tighten the mounting bolts (2). Refer to the Specifications Manual for the correct torque settings. Replacement
Refer to the Disassembly and Assembly manual for the installation procedure and the removal procedure for the belts.
To maximize the engine performance, inspect the belts for wear and for cracking. Replace belts that are worn or damaged.For applications that require multiple drive belts, replace the belts in matched sets. Replacing only one belt of a matched set will cause the new belt to carry more load because the older belt is stretched. The additional load on the new belt could cause the new belt to break.If the belts are too loose, vibration causes unnecessary wear on the belts and pulleys. Loose belts may slip enough to cause overheating.To accurately check the belt tension, a suitable gauge should be used. Refer to the Disassembly and Assembly manual for the correct procedure. If a suitable gauge is not available, apply 45 N (10 lb ft) of force midway between the pulleys. A correctly adjusted belt will deflect 10 mm (0.39 inch).Adjustment
Illustration 1 g00994667
Typical example
(1) Adjusting bolts
(2) Mounting bolts
Loosen the mounting bolts (2) and the adjusting bolts (1).
Move the alternator in order to increase or decrease the belt tension.
Tighten the adjusting bolts (1). Tighten the mounting bolts (2). Refer to the Specifications Manual for the correct torque settings. Replacement
Refer to the Disassembly and Assembly manual for the installation procedure and the removal procedure for the belts.
Caterpillar parts catalog:
Parts sensor Caterpillar catalog:
120H, 120K, 120K 2, 120M, 120M 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140G, 140H, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 14M, 160H, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD...
24H, 3176B, 3176C, 3196, 320D GC, 320D L, 323D L, 3406B, 3406E, 3408E, 3412E, 3456, 345B, 345B II, 345B II MH, 345B L, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 365B, 365B II, 365B L...
906H, 906H2, 907H, 907H2, 908H, 908H2, 953D, 963D, CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-68B, CS-74B, CS-76B, CS-78B, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K...
5130B, 5230B, 906H, 907H, 908H, 953D, 963C, 963D, D3G, D3K XL, D4G, D4K XL, D5G, D5K LGP, D6K, D6K LGP, D9T
120K, 120K 2, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 2290, 2390, 2391, 2491, 24M, 2570C, 259...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 420E, 430E, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG500E, BG600D, BG655D, C4.4...
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2570C, 2670C, 311D LRR, 312D, 312D L, 312E, 312E L, 313D, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318D L, 318E L, 319D, 319D L, 319D LN, 320D, 320...
525D, 535D, 545D, 824K, 825K, 826K, 834K, 836K, 844K, 924K, 930K, 938K, 950K, 962K, 963D, 966K, 966M, 966M XE, 972K, 972M, 972M XE, 980H, 980K, 980M, 982M, 988H, 988K, 990K, 992K, 993K, 994H, CB-44B, ...
2470C, 2570C, 2670C, 2864C, 553C, 563C, 573C, 584, 586C, 906H, 907H, 908H, 953D, 963D, 973D, D3K XL, D4K XL, D5K LGP, D6K, D6K LGP, D6R III, D6T, D7R II, PL61
521B, 522B, 541 2, 552 2, 777G, 785D, 906H2, 907H2, 908H2, 910K, 914K, 953D, 963D, 973D, D3K XL, D4K XL, D5K LGP, D6K LGP, D6K XL, D6T, PL61
3062127
SENSOR GP-POSITION
953D, 963D, 973D
953D, 963D, 973D
3062127
SENSOR GP-POSITION
953D, 963D, 973D
953D, 963D, 973D
D5R LGP, D6N, D6R III, D6T, D7R II
824K, 825K, 834K, 844K, D10T2, D11T, D6N LGP, D6R III, D6T, D6T LGP, D6T LGPPAT, D6T XL, D8T, D9T
D5R LGP, D6N, D6N LGP, D6N OEM, D6T LGP, D6T LGPPAT, D6T XL, D7E, D7E LGP, D8T, D9T, PL83
D7E, D7E LGP
3215930
SENSOR AS-FUEL LEVEL
973D, D11T
973D, D11T
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL