SENSOR GP-SPEED 2717537 - Caterpillar

Illustration 1 g03333802
Table 1
Specification for 379-5357 Turbocharger Gp
Item Qty Part Specification Description
1 2 7W-2297 Clamp As Use the following procedure in order to tighten the clamp and clamp assembly:
1. Tighten clamp assemblies to 14.0 1.5 N m (123.9 13.3 lb in).
2. Gently tap around the clamp assemblies with a soft faced hammer.
3. Again, tighten clamp assemblies to 14.0 1.5 N m (123.9 13.3 lb in).
2 4 7E-8516 Clamp
3 16 6V-2751 High Temperature Bolt Torque to 20.0 1.5 N m (177.0 13.3 lb in).
Close ends of lock plates one time only after final engine assembly and replace opened lock plates.
4 8 2N-2765 High Temperature Bolt Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize.
5 8 2N-2766 Locknut Torque to 54 5 N m (40 4 lb ft).
6 2 123-6979 V-Band Clamp Use the following procedure in order to tighten the clamps on the bellows assembly:
1. Tighten clamps to 9.5 1.0 N m (84.1 8.9 lb in).
2. Gently tap around the clamps with a soft faced hammer.
3. Again, tighten clamps to 9.5 1.0 N m (84.1 8.9 lb in).