SENSOR GP-POSITION 2719153 - Caterpillar

Personal injury can result from air pressure.Personal injury can result without following proper procedure. When using pressure air, wear a protective face shield and protective clothing.Maximum air pressure at the nozzle must be less than 205 kPa (30 psi) for cleaning purposes.
Raise the engine hood and open the access door on the left side of the machine.
Illustration 1 g01366489
Remove pins (1).
Remove screens (2) and (3).
Illustration 2 g01366490
(4) Hydraulic Oil Cooler
(5) Air to Air Aftercooler ATAAC
(6) Radiator Core
Check all of the core fins for debris.
Remove dust and debris from all of the core fins and from the screens. Compressed air is preferred, but high pressure water or steam can be used to remove dust and general debris from a core. See Special Publication, SEBD0518, "Know Your Cooling System" for more detailed information about cleaning core fins.
Install screens (2) and (3).
Install pins (1).
Close the engine hood and close the access door. Side Screens
Illustration 3 g01268061
Remove 3 bolts (1) and 3 washers (2).
Open the screen cover (3).
Remove screens (4) and (5).
Remove dust and debris from the screens. Compressed air is preferred, but high pressure water or steam can be used to remove dust and general debris from the screens.
Install screens (4) and (5).
Close the screen cover (3).
Install 3 bolts (1) and 3 washers (2). Top Screens
Illustration 4 g01268079
Remove 3 bolts (6).
Remove 3 screens (7).
Remove dust and debris from the screens. Compressed air is preferred, but high pressure water or steam can be used to remove dust and general debris from the screens.
Install 3 screens (7).
Install 3 bolts (6).