SENSOR GP-TEMP & PRESS 2809715 - Caterpillar

Illustration 1 g00103611
(1) Lubricate the inside diameter and the outside diameter with clean grease. (2) Rod assembly: Diameter of rod ... 104.93 0.03 mm (4.131 .001 inch) Minimum thickness for plating ... 0.033 0.007 mm (.0013 .0003 inch) (3) Bore of head ... 105.63 0.03 mm (4.1587 .001 inch) (4) Torque for nut ... 11000 550 N m (8125 410 lb ft) (5) 7Y-4666 Bearing : Outside diameter ... 95.180 0.013 mm (3.7472 .0005 inch) Inside diameter ... 80.25 0.02 mm (3.159 .001 inch) Install the bearing in the bearing bore. ... 7.5 0.3 mm (.30 .01 inch) (6) 7Y-5102 Bearing : Outside diameter ... 106.202 0.013 mm (4.1812 .0005 inch) Inside diameter ... 90.265 0.020 mm (3.5537 .0008 inch) Install the bearing in the bearing bore. ... 10.0 0.3 mm (.39 .01 inch) (7) Lubricate the sealing lip slightly with the lubricant that is being sealed: Install the seal in the bearing bore. ... 1.0 0.5 mm (.04 .02 inch) (8) Lubricate the sealing lip slightly with the lubricant that is being sealed. (9) Apply 4C-4032 Sealant to the groove before the cylinder is assembled.