SENSOR & MOUNTING GP 2924548 - Caterpillar

Illustration 1 g01346678
(1) Lubricate the threads and the washer face of the 144 bolts with 4C-5599 Anti-Seize Compound before assembly.Use the following procedure to tighten the full nuts (2) :
Tighten the full nuts of the diagonally opposite bolts simultaneously to 55 5 N m (41 4 lb ft).
Again, tighten the full nuts of the diagonally opposite bolts simultaneously to 55 5 N m (41 4 lb ft). (3) Lubricate the threads, the bearing surfaces, and the inside diameter of the four exhaust seal rings with 4C-5599 Anti-Seize Compound before assembly. (4) Lubricate the clamping surface and the inside diameter of the two couplings with 4C-5599 Anti-Seize Compound before assembly. (5) Lubricate the threads, the bearing surfaces, and the inside diameter of the four clamps with 4C-5599 Anti-Seize Compound before assembly. (6) Lubricate the inside diameter and the outside diameter of the bellows with 4C-5599 Anti-Seize Compound before assembly. (7) Lubricate the threads, the bearing surfaces, and the inside diameter of the four clamp assemblies with 4C-5599 Anti-Seize Compound before assembly. (8) Lubricate the threads, the bearing surfaces, and the inside diameter of the four V-band clamps with 4C-5599 Anti-Seize Compound before assembly.Note: Lubricate the threads of the four taperlock studs (9) with 4C-5599 Anti-Seize Compound before assembly. (9) Torque for the four taperlock studs ... 35 5 N m (26 4 lb ft)
Illustration 2 g01434856
Front view of engine (10) Lubricate the threads and the washer face of the six bolts with 4C-5599 Anti-Seize Compound before assembly.Note: Lubricate the threads and the washer face of the four bolts (11) with 4C-5599 Anti-Seize Compound before assembly. (11) Torque for the four bolts ... 55 5 N m (41 4 lb ft)