SENSOR GP-MTG& 3157181 - Caterpillar

Illustration 11 g02544946
Connect one Tool (A) to port "M1" (15) .
Illustration 12 g02544948
Connect second Tool (A) to port "M2" (16) .
Assemble Tool (F) .
Assemble Tool (G) .
Connect Tool (F) to Tool (G) .
Illustration 13 g02544951
Remove the cap from charge pressure tap (17) on the left propel pump. Connect Tool (F) to the pressure tap.
Move engine start switch (10) to the START position. Release the engine start switch when the engine starts.
Operate the engine at low idle for a few minutes.
Move throttle