3231997 SENSOR GP-SPEED Caterpillar parts
CB-534D, CB-54, CB-564D, CB-64
Rating:
Alternative (cross code) number:
CA3231997
323-1997
3231997
CA3231997
323-1997
3231997
Weight: 0.30 pounds 0 kg.
VIBRATORY COMPACTOR,
Number on catalog scheme:
19
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 173-9774 Bolt Remover (1) 1
B 9U-6198 Crankshaft Turning Tool 1
C 8S-2264 Puller Group 1
8S-4712 Bolt 2
( 1 ) The bolt remover is required in order to remove the tamper proof bolts on the access cover for the fuel injection pump.Start By:
Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
Remove the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".Note: For a complete description of Type 1 and Type 2 engines, refer to the Disassembly and Assembly, "Engine Design" topic.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00545256
Remove four bolts (1) .Note: Some engines may have four tamper proof bolts (1). Use Tool (A) in order to remove the tamper proof bolts bolts.
Remove cover (2) .
Illustration 2 g00545258
Remove nut (3) and the lockwasher.
Illustration 3 g00571370
Use Tool (B) to rotate the crankshaft until keyway (X) is at 30 degrees from the vertical centerline.
Illustration 4 g00571373
Install Tool (C) .
Disengage the gear from the fuel injection pump.
Illustration 5 g00545262
Disconnect hose (7) from the fuel injection pump.
Remove three nuts (6) that hold fuel injection pump (5) in position.
Remove fuel injection pump (5) and the gasket.Note: Ensure that you do not lose the key when the fuel injection pump is removed. Also notice the position of marks (4) in order to ensure proper alignment of fuel injection pump (5) during installation.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 173-9774 Bolt Remover (1) 1
B 9U-6198 Crankshaft Turning Tool 1
C 8S-2264 Puller Group 1
8S-4712 Bolt 2
( 1 ) The bolt remover is required in order to remove the tamper proof bolts on the access cover for the fuel injection pump.Start By:
Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
Remove the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".Note: For a complete description of Type 1 and Type 2 engines, refer to the Disassembly and Assembly, "Engine Design" topic.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00545256
Remove four bolts (1) .Note: Some engines may have four tamper proof bolts (1). Use Tool (A) in order to remove the tamper proof bolts bolts.
Remove cover (2) .
Illustration 2 g00545258
Remove nut (3) and the lockwasher.
Illustration 3 g00571370
Use Tool (B) to rotate the crankshaft until keyway (X) is at 30 degrees from the vertical centerline.
Illustration 4 g00571373
Install Tool (C) .
Disengage the gear from the fuel injection pump.
Illustration 5 g00545262
Disconnect hose (7) from the fuel injection pump.
Remove three nuts (6) that hold fuel injection pump (5) in position.
Remove fuel injection pump (5) and the gasket.Note: Ensure that you do not lose the key when the fuel injection pump is removed. Also notice the position of marks (4) in order to ensure proper alignment of fuel injection pump (5) during installation.
Caterpillar parts catalog:
Parts sensor Caterpillar catalog:
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 420E, 430E, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG500E, BG600D, BG655D, C4.4...
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2570C, 2670C, 311D LRR, 312D, 312D L, 312E, 312E L, 313D, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318D L, 318E L, 319D, 319D L, 319D LN, 320D, 320...
3054, 3056, 554, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, 914G, 924G, 924GZ, AP-650B, AP-800D, BG-225C, C175-16, C175-20, C3.3, C4.4, C6.6, C7.1, CB-434D, CB-534D...
2572531
SENSOR GP-POSITION
621G, 623G, 627G, 631G, 637G, 725, 730, 735, 740, 770, 772, 773F, 775F, 777F, 793F, 797F, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834H, 836H, 950G II, 962G II, 966G II, 972G II, 980G II, 980H, CB...
621G, 623G, 627G, 631G, 637G, 725, 730, 735, 740, 770, 772, 773F, 775F, 777F, 793F, 797F, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834H, 836H, 950G II, 962G II, 966G II, 972G II, 980G II, 980H, CB...
2578858
SENSOR GP-POSITION
621G, 623G, 627G, 631G, 637G, 657G, 725, 730, 735, 740, 770, 772, 773F, 775F, 777F, CB-434D, CB-534D, CB-564D
621G, 623G, 627G, 631G, 637G, 657G, 725, 730, 735, 740, 770, 772, 773F, 775F, 777F, CB-434D, CB-534D, CB-564D
621G, 621H, 621K, 623G, 623H, 623K, 623K LRC, 627G, 627H, 627K, 627K LRC, 631G, 637G, 657G, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 773F, 773G, 773G LRC, ...
2750917
SENSOR AS-SPEED
CB-534C, CB-534D, CB-564D, CB-634C, CB-634D
CB-534C, CB-534D, CB-564D, CB-634C, CB-634D
2342870
SENSOR GP-SPEED
CB-534D, CB-564D
CB-534D, CB-564D
2838438
SENSOR AS
CB-434D, CB-534D, CB-564D, CB-634D
CB-434D, CB-534D, CB-564D, CB-634D
2201098
SENSOR
CB-434D, CB-534D, CB-54, CB-564D
CB-434D, CB-534D, CB-54, CB-564D
3426632
SENSOR AS-TEMPERATURE
CB-44B, CB-54, CB-54B, CB-64, CD-54B, CW-34
CB-44B, CB-54, CB-54B, CB-64, CD-54B, CW-34
3613934
SENSOR
CB-44B, CB-54, CB-54B, CB-64, CD-54B, CW-34
CB-44B, CB-54, CB-54B, CB-64, CD-54B, CW-34
2342870
SENSOR GP-SPEED
CB-534D, CB-564D
CB-534D, CB-564D
2143438
SENSOR-SPEED
CP-433E, CP-533E, CP-56, CP-573E, CP-663E, CP-76, CS-423E, CS-533E, CS-54, CS-563E, CS-583E, CS-64, CS-663E, CS-683E, CS-74
CP-433E, CP-533E, CP-56, CP-573E, CP-663E, CP-76, CS-423E, CS-533E, CS-54, CS-563E, CS-583E, CS-64, CS-663E, CS-683E, CS-74
1622674
SENSOR AS-SPEED
AP-900B
AP-900B
1944966
SENSOR
AP-1055B
AP-1055B
2032330
SENSOR
CP-533E, CP-573E, CP-663E, CS-531D, CS-533D, CS-533E, CS-563D, CS-563E, CS-573D, CS-583D, CS-583E, CS-663E, CS-683E
CP-533E, CP-573E, CP-663E, CS-531D, CS-533D, CS-533E, CS-563D, CS-563E, CS-573D, CS-583D, CS-583E, CS-663E, CS-683E
2032329
SENSOR
CP-56, CP-573E, CP-663E, CP-76, CS-423E, CS-433E, CS-531D, CS-533D, CS-533E, CS-54, CS-563D, CS-563E, CS-573D, CS-583D, CS-583E, CS-64, CS-663E, CS-683E, CS-74
CP-56, CP-573E, CP-663E, CP-76, CS-423E, CS-433E, CS-531D, CS-533D, CS-533E, CS-54, CS-563D, CS-563E, CS-573D, CS-583D, CS-583E, CS-64, CS-663E, CS-683E, CS-74
2545472
SENSOR AS
CP-433E, CS-423E, CS-433E
CP-433E, CS-423E, CS-433E
2480342
SENSOR AS
CP-433E, CP-533E, CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-423E, CS-433E, CS-533E, CS-563E, CS-583E, CS-64, CS-683E, CS-74
CP-433E, CP-533E, CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-423E, CS-433E, CS-533E, CS-563E, CS-583E, CS-64, CS-683E, CS-74
2636123
SENSOR GP-SPEED
CB-434D
CB-434D
1920279
SENSOR GP-SPEED
CB-434D
CB-434D
2201098
SENSOR
CB-434D, CB-534D, CB-54, CB-564D
CB-434D, CB-534D, CB-54, CB-564D
2838438
SENSOR AS
CB-434D, CB-534D, CB-564D, CB-634D
CB-434D, CB-534D, CB-564D, CB-634D