SENSOR GP-PRESSURE 3252727 - Caterpillar

The areas highlighted are of particular importance but other areas must not be neglected. The entire structure must be carefully examined.
Boom
Illustration 1 g01425291
Typical example
Check all welded joints and check the mounting points for the cylinder.Stick
Illustration 2 g01425293
Typical example
Check all welded joints and check the mounting points for the cylinder.Blade
Illustration 3 g01425286
Typical example
If equipped with a blade, check the welded joints and check the mounting points for the cylinder.Lifting Points
Illustration 4 g01443627
Typical example
Check the approved lifting points carefully. Check the welds. Check that the plates are not excessively bent. Check that the lifting holes are not deformed.Upper Frame
Illustration 5 g01443601
Typical example
Check for damaged panels. Specifically look for any damage to the cab or damage to the canopy that might invalidate the certification. The cab or the canopy is a safety device that must be maintained in good condition. Check for loose hardware or missing hardware.Lower Frame
Illustration 6 g01443603
Typical example
Check the weld joints in the lower structure. Check for loose hardware or missing hardware. Check the ring of bolts that secure the swing gear.