SENSOR AS-INERTIAL 3338538 - Caterpillar

Illustration 1 g00665370
(1) Torque for the two bolts ... 105 15 N m (75 10 lb ft) (2) Lockup Clutch Total thickness of two new clutch plates and of two new friction discs ... 16.52 0.42 mm (.650 .016 inch) Thickness of one new 1T-1315 Clutch Plate ... 3.43 0.13 mm (.135 .005 inch) Thickness of one new IT-0887 Friction Disc ... 4.83 0.08 mm (.190 .003 inch) (3) Torque for the 24 bolts ... 105 15 N m (75 10 lb ft) (4) Clearance between the converter turbine and the converter housing across the diameter ... 1.80 0.38 mm (.071 .015 inch) (5) Impeller Clutch Total thickness of one new clutch plates and of two new friction discs ... 13.09 .21 mm (.515 .008 inch) Thickness of one new 1T-1897 Clutch Plate ... 3.43 0.05 mm (.135 .002 inch) Thickness of one new 8E-8328 Friction Disc ... 4.83 0.08 mm (.190 .003 inch) (6) Torque for the 36 bolts ... 60 7 N m (45 5 lb ft) (7) Torque for the 12 bolts ... 105 15 N m (75 10 lb ft) (8) 1T-0680 Spring (13) Working length ... 5.6 mm (.22 inch) Force at working length ... 7.8 N (1.75 lb) Free length (minimum) ... 9.1 mm (.3583 inch) Assembled radial length ... 9.1 0.5 mm (.36 .02 inch) (9) Torque for the eight bolts ... 60 7 N m (45 5 lb ft) (10) Lubricate the lip seal with a minimal amount of the lubricant that is being sealed. (11) Torque for the bolt ... 240 25 N m (175 20 lb ft) (12) Torque for the six bolts ... 60 7 N m (45 5 lb ft) (13) Clearance between the converter turbine and the converter stator across the diameter ... 0.81 0.26 mm (.0319 .0102 inch) (14) Clearance between the converter impeller and the converter housing across the diameter ... 1.25 0.33 mm (.049 .013 inch) (15) Clearance between the converter impeller and the converter stator across the diameter ... 0.81 0.26 mm (.0319 .0102 inch) (16) Torque for the 12 bolts ... 105 15 N m (75 10 lb ft) (17) Torque for the two bolts ... 60 7 N m (45 5 lb ft) (18) Torque for the 8 bolts ... 30 5 N m (22 4 lb ft) (19) Lubricate the bore with a minimal amount of the lubricant that is being sealed. (20) Impeller Housing and Adapter Assembly Sleeve bearing inside diameter after installation in the adapter assembly ... 160.24 0.08 mm (6.308 .003 inch) Diameter of the bearing surface of the impeller housing ... 160 0.013 mm (6.2992 .0005 inch)