3413684 SENSOR AS-LIQUID LEVEL Caterpillar parts
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
Rating:
Alternative (cross code) number:
CA3413684
341-3684
3413684
CA3413684
341-3684
3413684
Weight: 0.16 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 3413684:
Number on catalog scheme:
4
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Release the hydraulic system pressure.
Illustration 1 g02532541
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g02216734
Remove covers (1) and (2).
Illustration 3 g02216775
Disconnect hose assemblies (4) from pilot valve (3).
Illustration 4 g02216774
Disconnect harness assemblies (5).
Remove bolts (6) and pilot valve (3). Installation Procedure
Install pilot valve (3) in the reverse order of removal. Pilot Valve (Joystick) (Right Hand)
Removal Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Release the hydraulic system pressure.
Illustration 5 g02532657
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 6 g02217301
Remove covers (1) and (2).
Illustration 7 g02217302
Disconnect hose assemblies (4) from pilot valve (3).
Illustration 8 g02217303
Disconnect harness assemblies (5).
Remove bolts (6) and pilot valve (3). Installation Procedure
Install pilot valve (3) in the reverse order of removal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Release the hydraulic system pressure.
Illustration 1 g02532541
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g02216734
Remove covers (1) and (2).
Illustration 3 g02216775
Disconnect hose assemblies (4) from pilot valve (3).
Illustration 4 g02216774
Disconnect harness assemblies (5).
Remove bolts (6) and pilot valve (3). Installation Procedure
Install pilot valve (3) in the reverse order of removal. Pilot Valve (Joystick) (Right Hand)
Removal Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Release the hydraulic system pressure.
Illustration 5 g02532657
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 6 g02217301
Remove covers (1) and (2).
Illustration 7 g02217302
Disconnect hose assemblies (4) from pilot valve (3).
Illustration 8 g02217303
Disconnect harness assemblies (5).
Remove bolts (6) and pilot valve (3). Installation Procedure
Install pilot valve (3) in the reverse order of removal.
Caterpillar parts catalog:
Parts sensor Caterpillar catalog:
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2384C, 2484C, 2570C, 2670C, 2864C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320E, 320E L, 320E LN, 320E...
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2384C, 2484C, 2570C, 2670C, 2864C, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR,...
120K, 120K 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 2290, 2390, 2391, 2491, 24M, 2590, 2864C, 324D, 324D ...
120K, 120K 2, 120M, 12K, 12M, 140G, 140K, 140K 2, 140M, 14M, 160K, 160M, 16M, 24M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 36...
14M, 16M, 24M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, ...
12M 2, 140M 2, 160M 2, 336E, 336E H, 336E L, 336E LH, 336E LN, 349E, 349E L, 349E L VG, 349F L, 3516C, 374F L, 390F L, 568 FM LL, 621H, 627H, 735B, 740B, 824K, 825K, 826K, 834K, 836K, 906H, 907H, 908H...
311B, 312B, 312B L, 315B, 315B FM L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 320B U, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 385B,...
312C, 312C L, 314C, 315B L, 315C, 317B LN, 318B, 318C, 320C, 320C FM, 321B, 322C, 322C FM, 325C, 325C FM, 330C, 330C FM, 330C L, 330C MH, 365B, 385B, 5090B
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 313D2, 314C, 314D CR, 314D LCR, 315C, 315D L, 318C, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC,...
311D LRR, 311F LRR, 314D CR, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D ...
311D LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314D CR, 314D LCR, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D...
311F LRR, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 330D, 330D L, 336D, 336D L, 336D2, 3...
1831065
SENSOR-FUEL LEVEL
385B, 5090B
385B, 5090B
1301096
SENSOR-TEMPERATURE
375 L, 5080
375 L, 5080
7Y8809
SENSOR-FUEL LEVEL
350, 375, 375 L, 5080
350, 375, 375 L, 5080
1G3672
SENSOR
CB-521, CB-525B, PS-500
CB-521, CB-525B, PS-500
3937193
SENSOR-TEMPERATURE
CB-14B
CB-14B
3362011
SENSOR GP-TEMPERATURE
AS2302C, AS3301C, SE60 V XW
AS2302C, AS3301C, SE60 V XW
0812658
SENSOR
CB-214B
CB-214B
0831270
SENSOR
CS-643
CS-643
0814141
SENSOR
CB-521, CB-525B, CB-534, CS-643
CB-521, CB-525B, CB-534, CS-643
AP-1200
3076416
SENSOR-SPEED
AD55B, AD60
AD55B, AD60
1529614
SENSOR
365B, 365B II, 365B L, 365C, 385B, 385C, 385C L, 5090B
365B, 365B II, 365B L, 365C, 385B, 385C, 385C L, 5090B