SENSOR 3472166 - Caterpillar

Illustration 1 g01292310
Table 1
Specifications for 262-5766 Steering Cylinder Gp    
Item     Qty     Part     Specification Description    
A     -     -     Outer diameter of new piston over two lands
75.69 0.03 mm (2.980 0.001 inch).    
B     -     -     Bore of new cylinder assembly
76.20 0.08 mm (3.000 0.003 inch).    
C     -     -     Outer diameter of new rod
50.750 0.038 mm (1.9980 0.0015 inch).    
D     -     -     Bore of new head over four lands
51.13 0.03 mm (2.013 0.001 inch).    
1     1     212-0907 Connector Plate`     Apply Loctite 271 to the bottom prior to assembly.    
2     1     242-9515 Retaining Ring     Apply Loctite 242 to threads prior to assembly.    
-     -     -     Torque to
35 5 N m (26 4 lb ft).    
3     1     242-9514 Carrier     Apply Loctite 242 to threads prior to assembly.    
-     -     -     Torque to
35 5 N m (26 4 lb ft).    
4     -     -     Torque nut to
600 20 N m (440 15 lb ft).    
5     -     -     Lubricate the head with clean grease.    
-     -     -     Torque for head
600 130 N m (440 95 lb ft).    
Apply Loctite 609 to the groove for the wiper seal prior to assembly.    
6     -     -     Lubricate the sealing lips lightly with the lubricant being sealed.    
7     -     -     Torque for set screw
25 3 N m (220 27 lb in).    Position Sensor Group
Illustration 2 g02719742
Table 2
Specifications for 262-5906 Position Sensor Gp    
Item     Qty     Part     Specification Description    
8     1     262-5906 Position Sensor Gp     Supply voltage 10 + 1 − 3 VDC    
-     -     -     Operating temperature
−40 to 120 °C (−40 to 248 °F)