SENSOR GP-SOOT 3575353 - Caterpillar

Illustration 2 g00514434
Use a hoist and suitable lifting chains to carefully connect output transfer gears (19) to transmission (18). Make sure that O-ring seals (20) and (21) are not damaged during the connection. The weight of the output transfer gears is 525 kg (1160 lb).
Place two wood blocks (2) under the output transfer gears, as shown.
Illustration 3 g00505927
Illustration 4 g00505924
Install eighteen bolts (16) and the washers. Install two bolts (15) and the washers. Tighten bolts (15) and (16) to a torque of 270 40 N m (200 30 lb ft).
Illustration 5 g00505902
Remove Tooling (D) from the output transfer gears.
Illustration 6 g00505899
Use a hoist and a suitable lifting sling to install steering pump (9), transmission pump (10) and brake pump (11) to the torque converter, as shown. The weight of the three pumps as a unit is 80 kg (176 lb).
Install three bolts (14) and the washers.
Remove the hoist and the sling from steering pump (9) and brake pump (11) .
Illustration 7 g00505896
Connect hose assembly (13) to transmission pump (10) .
Illustration 8 g00505892
Install two tube assemblies (12) as a unit to steering pump (9) and brake pump (11) .
Install tube assembly (6) on transmission pump (10) .
Illustration 9 g00505890
Connect wire harness (7) at the electrical connection. Install bolt (8) and the washer that holds wire harness (7) in position.
Illustration 10 g00505889
Install four bolts (5) and the washers to tube assembly (6) and transmission magnetic screen (4) .
Connect hose assembly (3) to the transmission.
Illustration 11 g00505888
Remove Tooling (C) from the transmission.
Illustration 12 g00505885
Illustration 13 g00505886
Attach Tooling (A) to the engine and the output transfer gears, as shown. Attach a hoist and suitable lifting chains to Tooling (A) .
Use the hoist to lift the engine, the torque converter, the transmission and the output transfer gears from Tooling (B) and two wood blocks (2) .
Remove the two stands that are located under the flywheel housing. Carefully lower the complete unit on the two remaining stands of Tooling (B) and two wood blocks (2). The weight of the complete unit is 3630 kg (8000 lb).
Illustration 14 g00505884
Install two tube assemblies (1) as a unit to the engine and the transfer case.End By: Install the engine, the torque converter, the transmission and the output transfer gears. Refer to Disassembly and Assembly, "Engine, Torque converter, Transmission and Output Transfer Gears - Install" for the machine that is being serviced.