SENSOR GP-POSITION 3644217 - Caterpillar

Automatic Mode - Single Camera System
The single camera system is only available with the automatic mode enabled. The single camera system can be placed in "Standby" if configured. Refer to the "Standby" section for an explanation of the "Standby" option.Manual mode is intended for use only with the multi-camera applications. Manual mode is disabled for use in a single camera system.Note: If the single camera system can be placed in manual mode, PLEASE notify service personnel.In a single camera system, the system will automatically display the camera view based on current machine operation as determined by the WAVS configuration. For example, WAVS may be configured to display the view from a rearward looking camera when the operator selects reverse gear.Standby
Your single camera system installation may be configured with the "Standby" feature enabled or disabled. If "Standby" is enabled, the display will remain dark unless the camera view has been activated by machine operation. Standby may be useful at times when the operator feels that the display image is not needed, such as when travelling at night or when reverse will not be used. If "Standby" is disabled, the operator still has the option to adjust the brightness and/or contrast if the display is on constantly.Automatic Mode - Multi - Camera System
When the system is in the automatic mode, the system automatically selects the preferred camera view based on current machine operation as determined by the WAVS configuration. For example, WAVS may be configured to display the view from the rearward looking camera when the operator selects reverse gear.In a multi-camera system, the operator can override the automatic view by either:
selecting "Manual Mode" on the display
pressing the "Alternate Camera" switch. Refer to Illustration 1.
Illustration 1 g01181620
(1) Operator's Console
(2) Alternate Camera Switch In the "Automatic" mode, automatic selection of each camera will be enabled and the appropriate camera will be activated. In automatic mode, the display can also be placed in "Standby".Note: The preferred camera view will always be shown on the display screen unless the display is placed in "Manual" mode.Alternate Camera Switch
The Alternate camera switch allows the third camera to be activated. In the example of the Off-Highway Truck, the third camera is the side camera. The switch is a momentary switch that will need to be held down to activate the third camera. When the switch is released the image on the display will return either to the front or rear camera depending on what camera the machine is trying to activate. If configured this switch may also be providing power to a light that focuses on the viewing ara of the side camera. If the system is configured this way, the light will turn on any time the third camera is activated with Alternate camera switch.Note: If the image for the side camera is selected by using the buttons on the display in manual mode, the light on the side will not be powered because the light receiveds its power from the Alternate Camera Switch. The light