3727564 SENSOR & MTG GP-SOOT Caterpillar parts
C7.1
Rating:
Alternative (cross code) number:
CA3727564
372-7564
3727564
CA3727564
372-7564
3727564
GENERATOR SET,
Compatible equipment models: 3727564:
Number on catalog scheme:
For full view, you need register
Information:
Illustration 15 g02672924
Illustration 16 g02672956
Sudden release of spring force can cause injury.To prevent the possibility of injury, follow the procedure to relieve the spring pressure.
Note: There is spring force against retaining ring (21). When retaining ring (21) is removed, the spring force will be released. Removal of the internal components in barrel (16) should be performed in a press. This is done in order to retain spring (20) and retaining ring (21).
Use a press and Tooling (A) to compress the spring in barrel assembly (16).
Use Tooling (B) to remove retaining ring (21) from barrel assembly (16).
Remove retaining ring (21), spring (20), guide (19), and pins (18) from barrel assembly (16).
Illustration 17 g02672980
Move the swashplate up and down in order to remove the control piston (22).
Illustration 18 g02672983
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Note: In order to release piston rod (23) from the swashplate, lift the swashplate a little and move the piston rod sideways.
Remove piston rod (23).
Illustration 19 g02673016
Remove swashplate (24).
Illustration 20 g02673039
Remove spring (25).
Illustration 21 g02673044
Remove bearings (26).
Illustration 22 g02673056
Remove shaft assembly (27).
Illustration 23 g02673076
Illustration 24 g00670302
Remove retaining ring (28).
Use Tooling (A) to remove seal (29).
Illustration 25 g02673116
Remove two plugs (30) from pump body (5). Inspect the O-ring seals on the plugs. Replace the O-ring seals, if necessary.
Illustration 26 g02673122
Remove bearing cup (31) from pump body (5).
Illustration 27 g02673158
Use Tooling (C) and a suitable press to remove bearing cone (32) from shaft assembly (27).
Caterpillar SIS machinery equipment:
Parts sensor Caterpillar catalog:
3801093
SENSOR-TEMPERATURE
C18, C32, C7.1
C18, C32, C7.1
3879447
SENSOR GP
C7.1
C7.1
2703881
SENSOR AS-SPEED
3054, 3056, C4.4, C7.1
3054, 3056, C4.4, C7.1
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2570C, 2670C, 311D LRR, 312D, 312D L, 312E, 312E L, 313D, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318D L, 318E L, 319D, 319D L, 319D LN, 320D, 320...
120M 2, 2384C, 2484C, 2570C, 2670C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 416F, 420F, 428F, 4...
120M 2, 2384C, 2484C, 2570C, 2670C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 416F, 420F...
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2384C, 2484C, 2570C, 2670C, 2864C, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR,...
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2384C, 2484C, 2570C, 2670C, 2864C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320E, 320E L, 320E LN, 320E...
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2384C, 2484C, 2570C, 2670C, 2864C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320E, 320E L, 320E LN, 320E...
C1.5, C2.2
1299191
SENSOR GP-TEMPERATURE
3508, 3508B, 3512, 3512B, 3516, 3516B
3508, 3508B, 3512, 3512B, 3516, 3516B
2703880
SENSOR GP-SPEED
3056, C4.4
3056, C4.4
8C4337
SENSOR GP-2ND GRADE
AP-1000, AP-1050, AP-800
AP-1000, AP-1050, AP-800
784B, 785B, 789B, 793B, 793C, SPF343C
3117098
SENSOR & MTG GP-ELECTRIC
G3304B, G3306B
G3304B, G3306B
2022371
SENSOR GP-ENGINE
3126B, SPP101
3126B, SPP101
2384808
SENSOR GP-ENGINE
950H, 962H, IT62H
950H, 962H, IT62H