SENSOR GP-POSITION 3734327 - Caterpillar

This will bring up the installation screen. The Auto Shut Off is "INSTALLED". The Arrow will come up beside either the Installed or Not Installed depending upon the status. By selecting the button, this would change the status to Not Installed. By hitting the return button, the screen will go back to the Configuration Screen.
Illustration 72 g06156182
The screen will then display what the Current setting is (5 min is the default).
Illustration 73 g06156179
Scroll down the Configuration list until the Auto Shut Off Set is high lighted and Select the OK button.
Illustration 74 g06040347
The time can be increased or decreased by using the arrow buttons. The lowest shutdown time that can be selected is 3 min.
Illustration 75 g06156187There are several criteria that have to be met to have the Auto Shut Down work:
Throttle cannot be in speed position 10
The light switch cannot be ON
The Hydraulic System arm bar must be up
The Coolant Temp must be above 70 C
Illustration 76 g06156194The engine coolant temperature can be viewed by going back to the main menu and selecting the "PERFORMANCE INFO".
Illustration 77 g06156198If all the Criteria are met, the engine can be left on and the machine will automatically shut down after the given time period. 30 seconds before the system shuts down an audible alarm will sound and a countdown screen will appear.Adjust Courtesy Light Delay Time
(If Equipped)The courtesy light delay time can be adjusted in one second increments.This feature allows the exterior boom and cab lights to illuminate the job site for a preset time.Note: Change the length of time by following these steps: (Step 1) From the "Main Menu", gain access to the "Service" menu. (Step 2) Once in the "Service" menu, select "Configurations", "Courtesy Light Set", and "Courtesy Light Delay" as shown below:
Illustration 78 g06040372 (Step 3) Adjust the setting to the desired time by using the arrows and press "OK".
Illustration 79 g06040375Power On Demand
(If Equipped)Power on Demand provides optimal efficiency and performance at all times. This automatic system ensures fuel efficiency through appropriate engine rating to meet all operational needs as required while traveling and primary auxiliary function.Rear View Camera
(If Equipped)Rear view camera allows optimal vision while traveling and during machine setup in tight spaces.
Illustration 80 g06040699
Illustration 81 g06040702
Illustration 82 g06040704Site Reference
(If Equipped)The Site Reference System is accessed through the COMPASS monitor and provides the pitch and roll (in degrees) of the machine. This feature aids in grading and trenching applications.
Illustration 83 g06040679
Site reference screen