SENSOR GP-TEMPERATURE 3838600 - Caterpillar

Which Generate This Code:The Electronic Control Module (ECM) detects the following conditions:
The 8 V supply is less than 7.2 V for more than one second.
The ECM has been powered for more than 3 seconds.
Diagnostic code 0168-01 is not active at the same time.System Response:The ECM will log the diagnostic code and a warning will appear on the display on the control panel while this diagnostic code is active. An active diagnostic code may not cause any noticeable effect on engine response unless the voltage drops below 6.5 V. The engine may shut down.Note: The 8 V supply provides power to the digital throttle position sensor.Note: The 8 V supply provides power to the two speed/timing sensors. Test Step 1. Perform one of the following diagnostic procedures:
Digital Throttle Position Sensor Circuit - Test
Speed Control (PWM) - TestResults:
OK - STOP