3969104 SENSOR GP-SPEED Caterpillar parts
Rating:
Alternative (cross code) number:
CA3969104
396-9104
3969104
CA3969104
396-9104
3969104
Weight: 0.28 pounds 0 kg.
You can buy:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Air Compressor For ISBE Engines Compatible With 3971519 3969104 LK3839 K008457 3964688 Excavator Accessories
ShUDK Upgrade your excavator with the 1pc Air Compressor 3971519 designed for ISBE engines, ensuring performance for heavy-duty tasks. || Experience compatibility with multiple models including 3969104, LK3839, and K008457, making it suitable for a range of excavators. || Enhance the efficiency of your machinery by providing reliable air pressure, for various applications on construction sites. || Expect durability and performance, allowing you to tackle tough jobs without the worry of frequent replacements. || Benefit from straightforward installation, streamlining the process and reducing downtime in your operations.
ShUDK Upgrade your excavator with the 1pc Air Compressor 3971519 designed for ISBE engines, ensuring performance for heavy-duty tasks. || Experience compatibility with multiple models including 3969104, LK3839, and K008457, making it suitable for a range of excavators. || Enhance the efficiency of your machinery by providing reliable air pressure, for various applications on construction sites. || Expect durability and performance, allowing you to tackle tough jobs without the worry of frequent replacements. || Benefit from straightforward installation, streamlining the process and reducing downtime in your operations.
1pc Air Compressor 3969104 Compatible With QSL9 Engine Air Compressor Excavators Accessories Universal Fit
ZLUMCUWV Designed specifically as an air compressor replacement Compatible with excavators || construction ensures performance in heavy-duty applications || Direct fit replacement helps reduce installation time and effort || Engineered to meet specifications Compatible with function || Suitable Compatible with use in a variety of excavator models utilizing the QSL9 engine || Enhances overall system efficiency with consistent air compression output
ZLUMCUWV Designed specifically as an air compressor replacement Compatible with excavators || construction ensures performance in heavy-duty applications || Direct fit replacement helps reduce installation time and effort || Engineered to meet specifications Compatible with function || Suitable Compatible with use in a variety of excavator models utilizing the QSL9 engine || Enhances overall system efficiency with consistent air compression output
Air Brake Compressor Repair Kit 3687343 3969104 4933782 fits Cummins ISX Engine
Teaviatorial ????Part Name:Air Brake Compressor Repair Kit || ????Part Number:3687343 3969104 4933782 || ????Application:ISX Engine || ????Tip: If you need any other parts, please contact us - we are a professional sales team and have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here. || ????Attention: If you are unsure if the product is suitable for your machine model. In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please carefully check the product image and part number to ensure that it is the product you want. Thank you for your support and understanding!
Teaviatorial ????Part Name:Air Brake Compressor Repair Kit || ????Part Number:3687343 3969104 4933782 || ????Application:ISX Engine || ????Tip: If you need any other parts, please contact us - we are a professional sales team and have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here. || ????Attention: If you are unsure if the product is suitable for your machine model. In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please carefully check the product image and part number to ensure that it is the product you want. Thank you for your support and understanding!
Number on catalog scheme:
27
For full view, you need register
Information:
Check the bucket tips for wear. If the bucket tip has a hole, replace the bucket tip.
Remove the pin from the bucket tip. The pin can be removed by one of the following methods.
Use a hammer and a punch from the retainer side of the bucket to drive out the pin.
Use a Pin-Master. Follow Step 1.a through Step 1.c for the procedure.
Illustration 2 g01577993
(4) Back of Pin-Master
(5) Extractor
Place the Pin-Master on the bucket tip.
Align extractor (5) with the pin.
Strike the Pin-Master at the back of the tool (4) and remove the pin. Note: Discard the old pin and the retainer assembly. When you change tips, use a new pin and a new retainer assembly. Refer to the appropriate parts manual for your machine.
Illustration 3 g01577913
(6) Retainer assembly
(7) Adapter
Clean the adapter and the pin.
Fit retainer assembly (6) into the counterbore that is in the side of adapter (7). Make sure that the face of the retainer assembly with the marking "OUTSIDE" is visible.
Illustration 4 g00101359
Install the new bucket tip onto the adapter. Note: The bucket tips can be rotated by 180 degrees in order to allow the tip to wear evenly. You may also move the tips from the outside teeth to the inside teeth. Check the tips often. If wear is present on the tips, rotate the tips. The outside teeth generate the most wear.
Drive the pin through the bucket tip. The pin can be installed by using one of the following methods:
From the same side of the retainer, drive the pin through the bucket tip, the retainer assembly, and the adapter.
Use a Pin-Master. Follow Step 5.a through Step 5.e for the procedure.
Illustration 5 g01578233
(8) Pin
Insert pin (8) through the bucket tip.
Illustration 6 g01578342
Place the Pin-Master over the bucket tips so that the pin will fit into the counterbore of the pin holder (9).
Strike the Pin-Master with a hammer at the back of the tool (4) in order to insert the pin.
Slide pin holder (9) away from the pin and rotate the tool slightly in order to align pin setter (10) with the pin.
Illustration 7 g01209159
Final assembly of pin into bucket tip
Strike the end of the tool until the pin is fully inserted. Side Cutters
Illustration 8 g01579693
Bucket With Side Cutters
Remove the mounting bolts and the side cutters (11).
Clean the mounting surface of the side plate on the bucket and of the side cutter. Remove any burrs or protrusions on the mating surfaces.
Illustration 9 g01579713
(12) Shear ledge on a side cutter
(13) Side plate on a bucket
(B) 0.0 mm (0.0 inch) Note: Some side cutters may be rotated for additional wear.
Install the side cutter. Note: Certain bolts may require thread compound.
Hand tighten the bolts.
Make sure that there is not a gap between the side plate on the bucket and the shear ledge on the side cutter.
Torque the mounting bolts to the correct specification. Side Protectors (If Equipped)
Inspect the wear of the side protector. When too much wear is present, replace the protector.
Illustration 10 g01592996
Illustration 11 g01903678
(14) Side plate
(15) Retainer
(16) Side protector
(17) Pin
(18) Shim
Hit pin (17) from the side of the
Remove the pin from the bucket tip. The pin can be removed by one of the following methods.
Use a hammer and a punch from the retainer side of the bucket to drive out the pin.
Use a Pin-Master. Follow Step 1.a through Step 1.c for the procedure.
Illustration 2 g01577993
(4) Back of Pin-Master
(5) Extractor
Place the Pin-Master on the bucket tip.
Align extractor (5) with the pin.
Strike the Pin-Master at the back of the tool (4) and remove the pin. Note: Discard the old pin and the retainer assembly. When you change tips, use a new pin and a new retainer assembly. Refer to the appropriate parts manual for your machine.
Illustration 3 g01577913
(6) Retainer assembly
(7) Adapter
Clean the adapter and the pin.
Fit retainer assembly (6) into the counterbore that is in the side of adapter (7). Make sure that the face of the retainer assembly with the marking "OUTSIDE" is visible.
Illustration 4 g00101359
Install the new bucket tip onto the adapter. Note: The bucket tips can be rotated by 180 degrees in order to allow the tip to wear evenly. You may also move the tips from the outside teeth to the inside teeth. Check the tips often. If wear is present on the tips, rotate the tips. The outside teeth generate the most wear.
Drive the pin through the bucket tip. The pin can be installed by using one of the following methods:
From the same side of the retainer, drive the pin through the bucket tip, the retainer assembly, and the adapter.
Use a Pin-Master. Follow Step 5.a through Step 5.e for the procedure.
Illustration 5 g01578233
(8) Pin
Insert pin (8) through the bucket tip.
Illustration 6 g01578342
Place the Pin-Master over the bucket tips so that the pin will fit into the counterbore of the pin holder (9).
Strike the Pin-Master with a hammer at the back of the tool (4) in order to insert the pin.
Slide pin holder (9) away from the pin and rotate the tool slightly in order to align pin setter (10) with the pin.
Illustration 7 g01209159
Final assembly of pin into bucket tip
Strike the end of the tool until the pin is fully inserted. Side Cutters
Illustration 8 g01579693
Bucket With Side Cutters
Remove the mounting bolts and the side cutters (11).
Clean the mounting surface of the side plate on the bucket and of the side cutter. Remove any burrs or protrusions on the mating surfaces.
Illustration 9 g01579713
(12) Shear ledge on a side cutter
(13) Side plate on a bucket
(B) 0.0 mm (0.0 inch) Note: Some side cutters may be rotated for additional wear.
Install the side cutter. Note: Certain bolts may require thread compound.
Hand tighten the bolts.
Make sure that there is not a gap between the side plate on the bucket and the shear ledge on the side cutter.
Torque the mounting bolts to the correct specification. Side Protectors (If Equipped)
Inspect the wear of the side protector. When too much wear is present, replace the protector.
Illustration 10 g01592996
Illustration 11 g01903678
(14) Side plate
(15) Retainer
(16) Side protector
(17) Pin
(18) Shim
Hit pin (17) from the side of the
Caterpillar parts catalog:
Parts sensor Caterpillar catalog:
3732706
SENSOR GP-TEMPERATURE
Caterpillar
Caterpillar
5416344
SENSOR GP-PRESSURE
Caterpillar
Caterpillar
5366578
SENSOR & MTG GP-POSITION
Caterpillar
Caterpillar
4979541
SENSOR & MTG GP-POSITION
Caterpillar
Caterpillar
4904854
SENSOR & MTG GP-SOOT
Caterpillar
Caterpillar
4667188
SENSOR & MTG GP-POSITION
Caterpillar
Caterpillar
5104938
SENSOR GP-POSITION
Caterpillar
Caterpillar
4721511
SENSOR & MTG GP-GROUND SPEED
Caterpillar
Caterpillar
4652785
SENSOR & MOUNTING GP
Caterpillar
Caterpillar
4635557
SENSOR GP-TEMPERATURE
Caterpillar
Caterpillar
4217481
SENSOR GP-LIQUID LEVEL
Caterpillar
Caterpillar
4152428
SENSOR GP-EXHAUST TEMPERATURE
Caterpillar
Caterpillar