SENSOR AS 4370771 - Caterpillar

3408 PUMP SHOWN(1) Plug. Remove this plug to prime the pump.(2) Zinc rod and plug. Assemble rod in plug as follows: a. Put 9S3263 Thread Lock on the shoulder of rod. Do not put the thread lock on the threads of the rod.b. Tighten rod in plug to a torque of ... 7 3 N m (5 2 lb.ft.)(3) Pump Group. Pump rotation is clockwise as seen from the drive end.(4) Tighten bolt to a torque of ... 55 7 N m (40 5 lb.ft.) Hit the bolt with a soft faced hammer and tighten again to a torque of ... 55 7 N m (40 5 lb.ft.)(5) Put a light amount of clean engine oil or glycerine in the bore for the O-ring seal at assembly.