SENSOR AS-NITROGEN OXIDE 4415128 - Caterpillar

Illustration 1 g03372074
Table 1
Specification for 379-4832 Balancer Gp    
Item     Qty     Part     Specification Description    
1     1     4W-4998 Gear Shaft     Diameter is
74.900 0.015 mm (2.9488 0.0006 inch).    
2     4     8M-2530 Bolt     Torque to
140 10 N m (105 7 lb ft).    
3     1     8N-1286 Balancer Gear Assembly     Bore of 7N-6983 Bushing after assembly is
75.000 0.053 mm (2.9528 0.0021 inch).    
4     1     101-1365 Thrust Plate     Thickness is
6.35 0.25 mm (0.250 0.010 inch)    
-     -     -     The mark on the balancer gear must be in alignment with the mark on the crankshaft gear for standard rotation engines..