4784876 SENSOR GP-POSITION Caterpillar parts
Rating:
Alternative (cross code) number:
CA4784876
478-4876
4784876
CA4784876
478-4876
4784876
Weight: 1 pounds 0 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
New Bucket Angle Sensor 4784875 478-4876 Fits for CAT
XYohykai ◆TIPS◆: There is a wide range of products, if you can't find the part number you need, please contact us in time, we will provide details and quotes in the first time. || ◆Part Name◆:Bucket angle sensor || ◆Part Number◆:478-4875 4784875 478-4876 4784876 || ◆Application◆: Fits for CAT ◆Condition◆:New ◆This package includes◆:Bucket angle sensor*1 || ◆Notice◆-Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us.
XYohykai ◆TIPS◆: There is a wide range of products, if you can't find the part number you need, please contact us in time, we will provide details and quotes in the first time. || ◆Part Name◆:Bucket angle sensor || ◆Part Number◆:478-4875 4784875 478-4876 4784876 || ◆Application◆: Fits for CAT ◆Condition◆:New ◆This package includes◆:Bucket angle sensor*1 || ◆Notice◆-Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us.
This part in 2 request:
Show.
This information for suppliers only!
2023-11-26
2023-09-05
Number on catalog scheme:
9
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7574 Link Bracket 2 Start By:
Remove the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Remove".
Remove the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01008304
Remove bolts (1) that fasten the engine oil pan to flywheel housing (2).
Illustration 2 g01058428
Install Tooling (A) and a suitable lifting device on flywheel housing (2). The weight of flywheel housing (2) is approximately 105 kg (230 lb).
Remove bolts (3). Remove the flywheel housing from the cylinder block.
Remove gasket (4) from the flywheel housing. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7574 Link Bracket 2
B 8T-9022 Silicone Gasket -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean the flywheel housing and the rear face of the cylinder block.
Illustration 3 g01058428
Install Tooling (A) and a suitable lifting device on flywheel housing (2). The weight of flywheel housing (2) is approximately 105 kg (230 lb).
Install gasket (4) on the dowel pins of the cylinder block. Apply Tooling (B) to the bottom of the gasket in order to fill the space at the cylinder block, the flywheel housing, and the engine oil pan.
Position flywheel housing (2) and install bolts (3).
Illustration 4 g00551652
Tighten the bolts, as follows:
In a numerical sequence, tighten Bolt 1 through Bolt 24 to a torque of 40 10 N m (30 7 lb ft).
In a numerical sequence, again tighten Bolt 1 through Bolt 9 to a torque of 135 20 N m (100 15 lb ft).
In a numerical sequence, again tighten Bolt 10 through Bolt 24 to a torque of 55 10 N m (40 7 lb ft).
Illustration 5 g01008304
Install bolts (1) that fasten the engine oil pan to flywheel housing (2).
Remove Tooling (A). End By:
Install the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
Install the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7574 Link Bracket 2 Start By:
Remove the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Remove".
Remove the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01008304
Remove bolts (1) that fasten the engine oil pan to flywheel housing (2).
Illustration 2 g01058428
Install Tooling (A) and a suitable lifting device on flywheel housing (2). The weight of flywheel housing (2) is approximately 105 kg (230 lb).
Remove bolts (3). Remove the flywheel housing from the cylinder block.
Remove gasket (4) from the flywheel housing. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7574 Link Bracket 2
B 8T-9022 Silicone Gasket -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean the flywheel housing and the rear face of the cylinder block.
Illustration 3 g01058428
Install Tooling (A) and a suitable lifting device on flywheel housing (2). The weight of flywheel housing (2) is approximately 105 kg (230 lb).
Install gasket (4) on the dowel pins of the cylinder block. Apply Tooling (B) to the bottom of the gasket in order to fill the space at the cylinder block, the flywheel housing, and the engine oil pan.
Position flywheel housing (2) and install bolts (3).
Illustration 4 g00551652
Tighten the bolts, as follows:
In a numerical sequence, tighten Bolt 1 through Bolt 24 to a torque of 40 10 N m (30 7 lb ft).
In a numerical sequence, again tighten Bolt 1 through Bolt 9 to a torque of 135 20 N m (100 15 lb ft).
In a numerical sequence, again tighten Bolt 10 through Bolt 24 to a torque of 55 10 N m (40 7 lb ft).
Illustration 5 g01008304
Install bolts (1) that fasten the engine oil pan to flywheel housing (2).
Remove Tooling (A). End By:
Install the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
Install the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Install".
Caterpillar parts catalog:
Parts sensor Caterpillar catalog:
4784873
SENSOR-POSITION
Caterpillar
Caterpillar
4782330
SENSOR AS-SPEED
Caterpillar
Caterpillar
Caterpillar
4723463
SENSOR GP-GRADE
Caterpillar
Caterpillar
4723462
SENSOR GP-GRADE
Caterpillar
Caterpillar
4719959
SENSOR-GRADE
Caterpillar
Caterpillar
4875860
SENSOR-POSITION
Caterpillar
Caterpillar
Caterpillar
4871193
SENSOR-POSITION
Caterpillar
Caterpillar
Caterpillar
Caterpillar
4792224
SENSOR-SLOPE
Caterpillar
Caterpillar