SENSOR GP- 4872130 - Caterpillar

Illustration 3 g03791342
Disconnect hose assembly (3) if equipped.
Illustration 4 g03791369
Use a suitable lifting device to support link assembly (4) .
Illustration 5 g03791374
Remove bolt (5). Remove pin assembly (6). Disconnect link assembly (4) from lever assembly (7) .
Illustration 6 g03791377
Use a suitable lifting device to support link assembly (4) .
Remove bolt (8). Remove pin assembly (9). Remove link assembly (4) .
Illustration 7 g03791382
Remove lip seal (10). Repeat for the opposite side of the bore.
Illustration 8 g03791384
Remove sleeve bearing (11) from the link assembly.
Repeat Steps 7 and 8 for the opposite end of the link assembly.Installation Procedure
Illustration 9 g03791384
Install sleeve bearing (11) into the link assembly.
Illustration 10 g03791382
Install lip seal (10). Repeat for the opposite side of the bore.
Repeat Steps 1 and 2 for the opposite end of the link assembly.
Apply Tooling (A) to the pin bores and lip seals.
Illustration 11 g03791377
Use a suitable lifting device in order to position link assembly (4) .
Install pin assembly (9) and bolt (8) .
Illustration 12 g03791369
Use a suitable lifting device to support link assembly (4) .
Illustration 13 g03791374
Align the bore of link assembly (4) with the bores of lever assembly (7) .
Install pin assembly (6) and bolt (5) into lever assembly (7) .
Illustration 14 g03791342
Connect hose assembly (3) if equipped.
Illustration 15 g03791344
Illustration 16 g03791340
Connect bracket assembly (2) and hose assembly (1) if equipped.End By: Separate the steering frame lock.