SENSOR GP-POSITION 4875859 - Caterpillar

Illustration 1 g01221861
(1) The metal band is crimped on the hose assembly.Dealers should immediately remove certain 6D-7726 Hose Assemblies from inventory. Caterpillar was recently notified of a problem with the hose assemblies. There is the potential for failure of the hose assemblies. The failures could cause serious injury or property damage. Disposition and replacement information for the hose assemblies is provided in Service Letter, SEBE9382-00, "Product Improvement Program for Removing Certain 6D-7726 Hose Assemblies From Dealers' Service Tools".Inspect any hose assemblies with metal bands on the hose. If the metal band has a date from November 1, 2004 through June 1, 2005, remove the hose assembly from inventory. Return the band according to the instructions in the Service Letter. Hose assemblies that do not have the bands are not subject to the action. Most of the hose assemblies are components of service tools. The following chart identifies the tool groups that include one or more 6D-7726 Hose Assemblies.
Table 1
Tool Groups that Include the 6D-7726 Hose Assembly    
Part Number     Description    
8T-3035     Tensioner Lines Gp    
203-9195     Tool Gp (3618 Engine)    Some earlier tool groups that are no longer available also included 6D-7726 Hose Assemblies. Check in order to make sure that any replacement hose assemblies that might have been purchased are not part of the affected production run.