4935210 SENSOR GP- Caterpillar parts
Rating:
Alternative (cross code) number:
CA4935210
493-5210
4935210
CA4935210
493-5210
4935210
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Transparent Tarp Curtains,Weatherproof PVC Tarpaulin with Zipper,Tarpaulin with Zipper，0.5mm PVC Partition Curtain,Gray+Clear，Heavy-Duty，Weather Resistant (Size : H2xW4m/H6.5xW13.1ft)
JUCCJUXIN **Durable material: Tarpaulin Side Panels,The tarp curtains are made of high quality clear PVC and grey knife scraped fabric material heat-bonded at high temperature, beautiful, won't crack or leak, the edges are reinforced with nylon cords, tear-resistant and can be reused for a long time;thickness is about 0.5mm,700g/m² ，Heavy Duty Waterproof And Weather Resistance, || **Zipper door design:Outdoor Clear Tarp Curtain, There is a zipper door in the middle of the tarpaulin, which is very convenient to enter and exit; the number and position of zippers of the tarpaulin can be customized, if necessary, please contact us first, we will customize it for you, the transparent curtain makes everything through the waterproof layer visible, || **Double color splicing:zipper tarpaulin,the tarp side panels are made of heavy-duty Pvc soft glass coating and knife scraped fabric heat fused spliced together,tightly connected,no seams,beautiful and practical,and laying it flat won't cause any leakage of rain, and the transparent part in the middle has a clear view. || **Wide range of uses:Tarpaulin Side Panels, The transparent waterproof tarpaulin is soft and foldable, beautiful and durable, very suitable for indoor and outdoor use, for gardens, pergola, patio, porch, gazebo, balcony, carport, canopy, carport, tent, camping, || **Customized service: PVC Tarpaulin with Zipper,In addition to the existing tarpaulin specifications, we also support customized tarpaulin size, color, buttonhole spacing and position, zipper quantity and position, if you need customization, please contact us by email first,
JUCCJUXIN **Durable material: Tarpaulin Side Panels,The tarp curtains are made of high quality clear PVC and grey knife scraped fabric material heat-bonded at high temperature, beautiful, won't crack or leak, the edges are reinforced with nylon cords, tear-resistant and can be reused for a long time;thickness is about 0.5mm,700g/m² ，Heavy Duty Waterproof And Weather Resistance, || **Zipper door design:Outdoor Clear Tarp Curtain, There is a zipper door in the middle of the tarpaulin, which is very convenient to enter and exit; the number and position of zippers of the tarpaulin can be customized, if necessary, please contact us first, we will customize it for you, the transparent curtain makes everything through the waterproof layer visible, || **Double color splicing:zipper tarpaulin,the tarp side panels are made of heavy-duty Pvc soft glass coating and knife scraped fabric heat fused spliced together,tightly connected,no seams,beautiful and practical,and laying it flat won't cause any leakage of rain, and the transparent part in the middle has a clear view. || **Wide range of uses:Tarpaulin Side Panels, The transparent waterproof tarpaulin is soft and foldable, beautiful and durable, very suitable for indoor and outdoor use, for gardens, pergola, patio, porch, gazebo, balcony, carport, canopy, carport, tent, camping, || **Customized service: PVC Tarpaulin with Zipper,In addition to the existing tarpaulin specifications, we also support customized tarpaulin size, color, buttonhole spacing and position, zipper quantity and position, if you need customization, please contact us by email first,
Number on catalog scheme:
For full view, you need register
Information:
Illustration 1 g00835683
Schematic of the Proportional Solenoid (Lower)This diagnostic code is associated with the Proportional Solenoid (Lower). The FMI 05 diagnostic code means that the ECM has determined that the current of the solenoid is below normal. The possible causes of this diagnostic code are listed below:
The energize circuit of the solenoid is open.
The return circuit of the solenoid is open.
The solenoid has failed.
The ECM has failed. This is unlikely. Note: The following test procedure may create other diagnostic codes. Ignore these created diagnostic codes and clear these diagnostic codes when the original diagnostic code has been corrected. Ensure that the diagnostic code of CID 0355 FMI 05 is active before performing this procedure.Note: Use the 146-4080 Digital Multimeter for the measurements in this procedure.System Response:The implement system will not operate. The lift linkage will not lower. The levers must be recentered after the diagnostic code is corrected in order to allow the implements to operate.Test Step 1. CHECK THE SOLENOID.
Turn the disconnect switch and the key start switch to the ON position. Do not start the engine.
Disconnect the solenoid with the active diagnostic code from the machine harness.
At the machine harness connector for the solenoid, place a jumper wire from contact 1 (wire H714-OR) to contact 2 (wire H716-WH).
Observe the status of the CID 0355 FMI 05 diagnostic code.Expected Result:The CID 0355 FMI 05 diagnostic code remains active. Results:
YES - The diagnostic code remains active. The jumper wire does not affect the diagnostic code. Proceed to Test Step 2.
NO - The diagnostic is no longer active. The solenoid has failed.Repair: The solenoid has failed. Repeat this Test Step "CHECK THE SOLENOID" in order to verify the solenoid failure. Replace the solenoid. Verify that the new solenoid corrects the problem.STOPTest Step 2. CHECK THE HARNESS FOR AN OPEN.
Turn the key start switch and the disconnect switch to the OFF position.
Disconnect the machine harness connector(s) from the ECM.
The jumper wire that was installed in the previous Test Step remains in place.
At the machine harness connector, measure the resistance from signal contact J1-4 (wire H714-OR) to contact J1-7 (wire H716-WH).Expected Result:The resistance is less than 5.0 ohms.Results:
OK - The resistance is less than 5.0 ohms. The machine harness is correct. Proceed to Test Step 3.
NOT OK - The resistance is greater than 5000 ohms. The resistance measurement is not correct. There is an open circuit in the machine harness.Repair: The open is in wire H714-OR or in wire H716-WH of the machine harness. Repair the machine harness or replace the machine harness.STOPTest Step 3. CHECK IF THE DIAGNOSTIC CODE REMAINS.
Inspect the contacts of the harness connectors and clean the harness connectors.
Reconnect all harness connectors.
Turn the disconnect switch and the key start switch to the ON position.
Operate the machine.
Check the status of the CID 0355 FMI 05 diagnostic code.Expected Result:The CID 0355 FMI 05 diagnostic code is active. Results:
YES - The CID 0355 FMI 05 diagnostic code is active. The diagnostic code has not been corrected. The ECM may have failed.Repair: It
Caterpillar SIS machinery equipment:
Parts sensor Caterpillar catalog:
4934018
SENSOR GP-
Caterpillar
Caterpillar
4933386
SENSOR GP-
Caterpillar
Caterpillar
4933100
SENSOR-CURRENT
Caterpillar
Caterpillar
4932479
SENSOR AS-
Caterpillar
Caterpillar
4932017
SENSOR
Caterpillar
Caterpillar
4931474
SENSOR GP-
Caterpillar
Caterpillar
4937629
SENSOR GP-
Caterpillar
Caterpillar
4937626
SENSOR GP-
Caterpillar
Caterpillar
4937619
SENSOR GP-
Caterpillar
Caterpillar
4937618
SENSOR GP-
Caterpillar
Caterpillar
4937617
SENSOR GP-
Caterpillar
Caterpillar
4937526
SENSOR GP-
Caterpillar
Caterpillar