SENSOR GP-OIL LEVEL 5263697 - Caterpillar

Lifting the Horizontal SCR Reactor
Improper lift rigging can allow unit to tumble causing injury and damage.
Note: Rough handling, shock loads, and improper lifting procedures can damage internal components, mounting systems, and substrates.To lift the SCR reactor, use the lifting eyes that are located on each corner of the frame. Chains of equal length and/or a spreader bar should be used. Damage to the SCR reactor may occur if not properly lifted. Refer to table 1 and table 2 for information on the weight of the reactor and components.
Illustration 1 g03716698
Table 1
Weight of Aftertreatment Components
Components Weight (per each component)
SCR brick 22 kg (49 lb)
DPF 25 kg (55 lb)
DOC 19 kg (42 lb) Note: Reactor data is in TMI and is different for each reactor size and catalyst combinationNote: Consult your Cat dealer for weight of CEM and Dosing cabinet.
Table 2
Total Weight of Aftertreatment Components
Components Total Weight
Reactor and 48 SCR bricks 3300 kg (7275 lb)
Reactor, 48 SCR bricks, and 12 DPFs 3600 kg (7937 lb)
Reactor, 48 SCR bricks, and 12 DOCs 3530 kg (7782 lb) Lifting the Dosing Cabinet
Improper lift rigging can allow unit to tumble causing injury and damage.
Use appropriate lifting equipment to lift the dosing control cabinet. Ensure that all chains, hooks, slings, and other lifting devices have been inspected and are in good condition. Ensure that all lifting devices are of the correct capacity. Make sure that lifting devices are positioned correctly. Lifting eyes are not to be side loaded during lifting.
Illustration 2 g06033498
The weight of the dosing control cabinet is approximately 95 kg (209.4 lb) with DEF.