SENSOR AS 5699993 - Caterpillar

Illustration 1 g02788847
Table 1
Specification for 378-1274 Hoe Stick Gp    
Item     Qty     Part     Specification Description    
Before assembly, coat all bores for the pins and the sealing lips with black 5P-0960 Grease Cartridge. After assembly, apply black 5P-0960 Grease Cartridge to all joints from the fittings.    
1     4     093-1430 Lip Type Seal     Install the dust seal so that the lip faces outside, as shown.    
2     4     265-8720 Bushing     Before assembly, all bores must be free from paint and grease. After assembly, coat all the bores with black 5P-0960 Grease Cartridge.    
Inside diameter before assembly is
45.221 0.015 mm (1.7804 0.0006 inch).
Installation depth is
5.0 0.5 mm (0.20 0.02 inch).
3     1     266-3899 Pin As     Diameter is
49.936 to 49.975 mm (1.9661 to 1.9675 inch).    
4     1     266-3897 Pin As     Diameter is
44.936 to 44.975 mm (1.7691 to 1.7707 inch).    
5     1     266-3901 Pin As     Diameter is
44.936 to 44.975 mm (1.7691 to 1.7707 inch).    
6     As required, use the following shims to adjust the minimum lateral clearance to the maximum of
0.6 mm (0.02 inch):    
1 176-8464 Shim     Thickness is
0.5 mm (0.02 inch).    
2 176-8465 Shim     Thickness is
1.0 mm (0.04 inch).    
7     As required, use the following shims to adjust the minimum lateral clearance to the maximum of
0.6 mm (0.02 inch):    
1 176-8464 Shim     Thickness is
0.5 mm (0.02 inch).    
2 176-8465 Shim     Thickness is
1.0 mm (0.04 inch).    
8     As required, use the following shims to adjust the minimum lateral clearance to the maximum of
0.6 mm (0.02 inch):    
1 150-5699 Shim     Thickness is
0.6 mm (0.02 inch).    
1 150-5689 Shim     Thickness is
1.0 mm (0.04 inch).    
9     2     265-8724 Bushing     Before assembly, all bores must be free from paint and grease. After assembly, coat all the bores with black 5P-0960 Grease Cartridge.    
Inside diameter before assembly is
50.238 0.025 mm (1.9779 0.0010 inch).
Installation depth is
5.0 0.5 mm (0.20 0.02 inch).
10     3     8T-4137 Bolt     Torque to
70 15 N m (52 11 lb ft).    
11     2     150-5697 Lip Type Seal     Install the dust seal so that the lip faces outside, as shown.