SENSOR AS-PRESS 7X6182 - Caterpillar

Illustration 2 g02948438
Table 2
Specification for 334-0436 Bucket Control Gp    
Item     Qty     Part     Specification description    
7     1     136-9380 Pin As     Diameter is
88.86 0.04 mm (3.498 0.002 inch).    
8     1     227-4340 Bushing     Bore of the bushing before assembly is
114.56 0.02 mm (4.510 0.008 inch).
Installation depth of the bushing in the lever assembly is
0 to 2 mm (0.0 to 0.1 inch).    
9     1     9C-0093 Pin As     Diameter is
114.262 0.040 mm (4.4985 0.0016 inch).    
10     2     7K-9218 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
11     2     4E-3196 Pin As     Diameter is
76.175 0.025 mm (2.9990 0.0010 inch).    
12     2     4V-8674 Bushing     Bore of the bushing before assembly is
76.481 0.020 mm (3.0111 0.0008 inch).
Installation depth of the bushing in the arm assembly is
9.5 1.0 mm (0.37 0.04 inch).    
13     4     7K-9209 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
14     1     227-4342 Bushing     Bore of the bushing before assembly is
82.795 0.020 mm (3.2596 0.0008 inch).
Installation depth of the bushing in the link assembly is
1.0 mm (0.04 inch).    
15     1     310-1899 Pin As     Diameter is
82.525 0.040 mm (3.2490 0.0016 inch).    
16     2     7K-9210 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
17     1     4V-8520 Bushing     Bore of the bushing before assembly is
89.185 0.020 mm (3.5112 0.0008 inch).
Installation depth of the bushing in the link assembly is
10.0 1.0 mm (0.39 0.04 inch).    
18     4     7K-9205 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
As required, install the following washers between the lift arm and the bucket in order to suit the minimum clearance fit up and to provide intermediate wear surface. Use a minimum of one washer at each boss interface.    
19     6     5V-0354 Washer     Thickness of one washer is
3.0 mm (0.12 inch).    
20     4     5V-0353 Washer     Thickness of one washer is
1.6 mm (0.06 inch).    
21     2     5V-1874 Bushing     Bore of the bushing before assembly is
63.741 0.020 mm (2.5095 0.0008 inch).
Installation depth of the bushing in the arm assembly is
10.0 1.0 mm (0.39 0.04 inch).    
22     2     5V-1511 Pin As     Diameter is
63.475 0.025 mm (2.4990 0.0010 inch).