0943551 SEPARATOR-WATER Caterpillar parts
320 L, 322, 322 LN, 325, 325 L, 325 LN, 330, 330 L, 350, E110B, E120B, E140, E200B, E240C, E300, E300B, E450, E650, EL240B
Rating:
Alternative (cross code) number:
CA0943551
094-3551
0943551
CA0943551
094-3551
0943551
Weight: 1 pounds 0 kg.
EXCAVATOR,
Compatible equipment models: 0943551:
Information:
Installation Procedure
Table 1
Required Tools
Tools Part Number Part Description Qty
A 138-8440 Component Cleaner 1
B 169-5464 Quick Cure Primer 1
C 1U-8846 Gasket Sealant 1
Illustration 1 g01011906
Clean the joint face on front housing (4) with Tooling (A).
Apply Tooling (B) to the joint face. Allow the primer to dry for at least three to five minutes. Note: Do not allow Tooling (C) to seal the main oil passage on front housing (4).
Apply Tooling (C) to the joint face. Spread the sealant uniformly. The front housing must be installed within ten minutes of applying the sealant.
Position the front housing on the cylinder block.
Install bolts (5) that fasten the front housing to the cylinder block and the engine oil pan.
Illustration 2 g01011903
Position belt tightener (3) and install bolts (1).
Position the front engine support and install bolts (2).
Install any external components, if equipped. End By:
Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install".
Install the crankshaft front seal. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
Install the crankshaft vibration damper. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
Table 1
Required Tools
Tools Part Number Part Description Qty
A 138-8440 Component Cleaner 1
B 169-5464 Quick Cure Primer 1
C 1U-8846 Gasket Sealant 1
Illustration 1 g01011906
Clean the joint face on front housing (4) with Tooling (A).
Apply Tooling (B) to the joint face. Allow the primer to dry for at least three to five minutes. Note: Do not allow Tooling (C) to seal the main oil passage on front housing (4).
Apply Tooling (C) to the joint face. Spread the sealant uniformly. The front housing must be installed within ten minutes of applying the sealant.
Position the front housing on the cylinder block.
Install bolts (5) that fasten the front housing to the cylinder block and the engine oil pan.
Illustration 2 g01011903
Position belt tightener (3) and install bolts (1).
Position the front engine support and install bolts (2).
Install any external components, if equipped. End By:
Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install".
Install the crankshaft front seal. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
Install the crankshaft vibration damper. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
Caterpillar parts catalog:
Parts separator Caterpillar catalog:
7Y2252
SEPARATOR GP-WATER
330, 330 L
330, 330 L
4I0167
SEPARATOR GP-WATER
325, 325 L, 325 LN
325, 325 L, 325 LN
7I6390
SEPARATOR GP-WATER
322, 322 LN
322, 322 LN
7I1675
SEPARATOR AS
311, 320, 320 L, 322 FM L, 325, 325 L, 330, 330 FM L, 330B, 330B L, W330B
311, 320, 320 L, 322 FM L, 325, 325 L, 330, 330 FM L, 330B, 330B L, W330B
1141375
SEPARATOR-BEARING
322B L, 322C
322B L, 322C
1141376
SEPARATOR-BEARING
322B L, 322C
322B L, 322C
43423026
SEPARATOR SPRING
WE-601B, WE-851B
WE-601B, WE-851B
29190002
SEPARATOR, WATER
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
0780415
SEPARATOR
CS-551
CS-551
8N7596
SEPARATOR AS.
CP-433B
CP-433B
5369903
SEPARATOR AS-WATER
Caterpillar
Caterpillar
1362973
SEPARATOR
385B
385B
1362972
SEPARATOR
385B
385B
1028327
SEPARATOR
320 L, 320N
320 L, 320N
1141491
SEPARATOR
320C
320C