SEPARATOR-OIL 4745914 - Caterpillar

Underside of cooler1. Disconnect two hoses (1) and electric wire. Remove two bolts (2) at cooler bracket. 2. Disconnect two hoses (3) from cooler, disconnect wires (4).3. Remove four bolts (5) and remove cooler.4. Remove bolts and remove end covers. 5. Use a 3.0 mm (.12 in.) diameter rod (6) to clean each tube of the oil cooler. The following steps are for installation of the transmission oil cooler. The following steps are for installation of the transmission oil cooler.6. Install the ends on the cooler, position cooler and install four bolts (5).7. Connect wires (4) and hoses (3). Install bolts (2) at cooler and bracket.8. Connect hoses (1).