SERVICE GP- 2418441 - Caterpillar

Illustration 1 g02905956
(2) Camshaft drive gear
Table 1
Specification for 327-0824 Rear Gear Gp and 327-0825 Rear Gear Gp
Item Qty Part Specification Description
1 1 328-7113 Cluster Gear Shaft Diameter is 74.970 0.010 mm (2.9516 0.0004 inch).
3 1 307-9789 Thrust Plate Thickness of new thrust plate is 6.35 0.25 mm (0.250 0.010 inch).
4 1 254-5886 Idler Gear As After installation, bore of 254-5887 Bushing in the idler gear assembly is 75.060 0.010 mm (2.9551 0.0004 inch).
Installation depth of the bushing is 2.0 0.5 mm (0.08 0.02 inch).
- - - The mark (5) on the idler gear assembly must be in alignment with the mark on the crankshaft gear (7).
6 1 345-8567 Dowel Pin Protrusion of dowel pin is 10.0 0.5 mm (0.39 0.02 inch).