SERVICE GP-SEAT 4V7629 - Caterpillar

Illustration 1 g00282750
Typical exampleWhen the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25°C (77°F) Speed ... 5500 rpm minimum Current draw ... 140 amp maximum Voltage ... 24 V (1) Nut Tighten the nut on the battery terminal to the following torque. ... 30.5 3.5 N m (23 3 lb ft) (2) Nut Tighten the nut on the ground terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (3) Nut Tighten the nut on the ground terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (4) NutThe terminal that is on the switch terminal must be insulated with heat shrink tubing. Tighten the nut on the switch terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (5) Nut Tighten the nut on the motor terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (6) Nut Tighten the nut on the motor frame terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft)Clearance between the pinion and the housing ... 8.3 to 9.9 mm (0.33 to 0.39 inch)SolenoidCurrent draw at 24 V and 25°C (77°F) Pull-in windings ... 51 Amp Hold-in windings ... 7 Amp maximum