0676886 SET-BEARING Caterpillar parts
206, 3054, 3054B, 416C, 428C, CB-424, CP-433C, CS-323, CS-323C, CS-431C, PR-75, PS-110, PS-130, PS-180, TH210, TH215
Rating:
Alternative (cross code) number:
CA0676886
067-6886
0676886
CA0676886
067-6886
0676886
Weight: 0.80 pounds 0 kg.
BACKHOE LOADER, VIBRATORY COMPACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
067-6886 BEARING SET, CONROD - STD Suitable For Caterpillar® 0676886
KMP BRAND Suitable for Caterpillar
KMP BRAND Suitable for Caterpillar
067-6886 BEARING SET, CONROD - STD Suitable For Caterpillar® 0676886
KMP BRAND Suitable for Caterpillar
KMP BRAND Suitable for Caterpillar
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 0676886:
Information:
Bosch StartersWhen the solenoid is installed on Bosch starters, there is a recommended distance between the starter housing and the solenoid. See illustration. This gives the correct amount of movement for the shift lever and the pinion. The procedure follows.
Dimension required when the solenoid is installed on the starter.1. Put a small amount of grease on the reel.2. Put a few drops of engine oil on the solenoid shaft.3. Insert the solenoid reel in the starter housing and position the reel on the fork of the shift lever.4. Install, but do not tighten, the four screws and washers that mount the solenoid to the starter housing.5. Slightly move the solenoid until the distance between the housing and solenoid clamp (NOT the solenoid) is as shown. The clamp is spot-welded to the solenoid.6. Tighten screws to 7.2 to 9.7 N m (64 to 86 lb in).7. Reconnect cable.
Dimension required when the solenoid is installed on the starter.1. Put a small amount of grease on the reel.2. Put a few drops of engine oil on the solenoid shaft.3. Insert the solenoid reel in the starter housing and position the reel on the fork of the shift lever.4. Install, but do not tighten, the four screws and washers that mount the solenoid to the starter housing.5. Slightly move the solenoid until the distance between the housing and solenoid clamp (NOT the solenoid) is as shown. The clamp is spot-welded to the solenoid.6. Tighten screws to 7.2 to 9.7 N m (64 to 86 lb in).7. Reconnect cable.
Caterpillar parts catalog:
Parts set Caterpillar catalog:
2339454
SET-LOCKWASHER
416C, 416D, 420D, 424D, 428C, 428D, 430D, 432D, 438C, 438D, 442D
416C, 416D, 420D, 424D, 428C, 428D, 430D, 432D, 438C, 438D, 442D
7W4632
SET-TAPERED RING
214, 224, 3054, 3054B, 3056, 3056E, 550B, 560B, 564, 574B, 924G, 924GZ, 930G, AP-1200, AP-655C, BB-760, CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E, IT28G, M316C, M318C, M318C MH, M322C
214, 224, 3054, 3054B, 3056, 3056E, 550B, 560B, 564, 574B, 924G, 924GZ, 930G, AP-1200, AP-655C, BB-760, CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E, IT28G, M316C, M318C, M318C MH, M322C
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 303C CR, 3044C, 304C CR, 305.5D, 305C CR, 305D...
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 303C CR, 3044C, 304C CR, 305.5D, 305C CR, 305D...
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 303C CR, 3044C, 304C CR, 305.5D, 305C CR, 305D...
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 303C CR, 3044C, 304C CR, 305.5D, 305C CR, 305D...
1572028
SET-POWER WIRE
115, 315D L, 416E, 63, H140CS
115, 315D L, 416E, 63, H140CS
2339454
SET-LOCKWASHER
416C, 416D, 420D, 424D, 428C, 428D, 430D, 432D, 438C, 438D, 442D
416C, 416D, 420D, 424D, 428C, 428D, 430D, 432D, 438C, 438D, 442D