SET-BEVEL GEAR 2568702 - Caterpillar

Antitheft Keypad Owner Functions
Illustration 1 g03806068
(1) Button for numbers one and two
(2) Button for numbers three and four
(3) Button for numbers five and six
(4) Button for numbers seven and eight
(5) Button for numbers nine and zero
(A) LED 1
(B) LED 2The antitheft keypad immobilizes the engine, transmission, and hydraulic systems until a valid password is entered. The password is of four characters or six characters. Two numbers are shown on each button for reference, the system recognizes the button press order. For example, for code "3-1-4-4-2-7" or code "4-2-3-3-1-8" press buttons "2-1-2-2-1-4".Note: A "Master" passcode and operator 'User" passcode are set by your Caterpllar dealer via the service tool upon machine delivery. Remember this code to avoid dealer visits to reset the master code. The factory shipped default is set to MSS off.Normal Customer Operation
Unlock the Machine Keypad
Unlock - The unlock indicator (A) is located to the left of button (1) and will illuminate green when the keypad is unlocked.
At key on, the indicator (A) will flash red, enter desired User password within 10 minutes.
If password is correct, the unlock indictor will illuminate Green and double beep will be heard. The system is now unlocked. If an incorrect password is entered, the lock indicator will flash Red.Note: If the password is entered 5 times incorrectly, the keypad will be placed in tamper mode and will be disabled for 15 minutes.Note: If the key is turned to off position after 5 incorrect codes have been entered the key needs to be left on key position 1 or 2 for the system to reset.
If a valid password is entered with the key in the off position, the system will not Unlock until the key has been turned On.
If the key switch is turned to the ON position but no password is entered within 10 minutes. The system will lockout and the key switch must be turned to the OFF position again to reset.Tamper Lockout procedure
When five wrong passcodes are entered, the keypad enters into Tamper Lockout mode and "LED 2" will flash alternating from red to amber.
Tamper mode will run for 15 minutes. Wait with the key switch ON for "LED 2" to flash a slow red light before re-entering a password.Lock the Machine Keypad
Lock - The lock indicator (B) is located to the right of button (5) and will illuminate red when the keypad is locked.
Turn the keyswitch to the OFF position. The unlock indicator will flash.
After a 30 second time period the keypad will automatically Lock and the Lock indicator will illuminate red.
If the keyswitch is returned to the On position during the 30 second timeout the keypad resumes unlocked.Note: The factory default lock time is set at 30 seconds after key off, this can be adjusted to suit operator / application preferences via the service tool - Please contact your Caterpillar dealer for further information.Delayed Lock Feature
Temporarily keeps the machine unlocked for 15 minutes.
When turning the key switch to the OFF position, press and hold button (3) for 1