SETSCREW 0995742 - Caterpillar

Illustration 1 g03336049
Table 1
Specification for 296-0943 296-0947 Bucket Linkage Gp
Item Qty Part Specification Description
Coat all bores for pins with 5P-0960 Grease Cartridge.
1 2 8T-4244 Nut Position the nut (1) to the distance 0.0 to 1.0 mm (0.00 to 0.04 inch) past the end of the bolt. For locking, tighten the nut (2) against the nut (1).
Torque to 70 15 N m (52 11 lb ft).
2 2 8T-4244 Nut
3 - - During assembly of the linkage group on machine, rotate the rod end of the bucket cylinder to position the grease fitting away from the stick.
4 4 150-5689 Shim As required, use the shim to adjust the lateral clearance to a maximum of 1.0 mm (0.04 inch):
Thickness is 1.0 mm (0.04 inch).
5 1 296-9480 Pin Diameter is 49.89 0.02 mm (1.964 0.001 inch).
6 1 296-9479 Pin Diameter is 54.890 0.023 mm (2.1610 0.0009 inch).
7 4 093-0064 Shim As required, use the shim to adjust the lateral clearance to a maximum of 1.0 mm (0.04 inch):
Thickness is 1.0 mm (0.04 inch).
8 2 296-9481 Pin Diameter is 49.89 0.02 mm (1.964 0.001 inch).
9 4 093-1432 Lip Type Seal Dust seal must be assembled such that lip is located to the outside of the boss and directed as shown.
10 2 218-5197 Bushing Bore before assembly is 55.200 0.025 mm (2.1732 0.0010 inch).
Installation depth is 5.0 0.5 mm (0.20 0.02 inch).
11 2 296-9578 Lip Type Seal Dust seal must be assembled such that lip is located to the outside of the boss and directed as shown.
12 2 296-9438 Bushing Bore before assembly is 50.200 0.015 mm (1.9764 0.0006 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).