SFWR GP-A3000 3887291 - Caterpillar

Bus Bar Removal Procedure
Remove the access panels (1).
Illustration 1 g01651235Note: Ensure that all of the wires and all of the cables are labeled before disassembly.
Remove the cables (4) from the bus bar assembly (2). Remove the clamp assembly (5). Repeat this step for all of the cables that are connected to each bus bar (2).
Illustration 2 g01651234
Bus Bar Assembly and Generator Cables
(2) Bus Bars
(3) Access Holes
(4) Generator Cables
(5) Cable Clamp Assembly
Feed the cable (4) through the access holes (3).
Make an alignment mark (10) from the bus bar assembly plate (7) to the terminal box (8).
Remove the mounting bolts (6) that attach the bus bar assembly plate (7) to the bus bar housing (8).
Use two people in order to remove the bus bar (7) assembly. The weight of bus bar (7) is approximately 23 kg (50 lb).
Illustration 3 g01651233Installation Procedure
Illustration 4 g01651233
Use two people in order to install bus bar (4). The weight of bus bar (4) is approximately 23 kg (50 lb).
Illustration 5 g01651234
Feed the cable assemblies (2) through the access holes.
Install cable assemblies (2) onto the terminal and install clamp assembly (3). Repeat this step for all other cable assemblies.
Illustration 6 g01651235
Install panels (1).