SFWR GP-A6001 4912321 - Caterpillar

start by:a) remove vibration damper and pulleyb) remove crankcase guard (front) The grille assembly, radiator, hydraulic oil cooler, fan and fan drive are removed for better photo illustration. 1. Remove four of the bolts that hold the oil pan in position and install tooling (A) under the front of the oil pan as shown. 2. Loosen bolts (3).3. Put tooling (B) in position under the center of tooling (A).4. Lift the front of the engine with tooling (B) until the support is not in contact with the frame.5. Remove bolts (3) and (2). Remove support (1).Install Engine Front Support
1. Put support (1) in position on the trunnion and install bolts (2) to hold it.2. Install the bolts that hold support (1) to the frame. 3. Lower the front of the engine with tooling (A) until the support is in contact with the frame.4. Tighten the bolts that hold support (1) in position.5. Remove tooling (A).6. Remove tooling (B) and install the four bolts that hold the oil pan.end by:a) install crankcase guard (front)b) install vibration damper and pulley