SFWR GP-A1000 5247065 - Caterpillar

Table 1
Required Parts For Rework    
Item     Part Number     Description     Qty    
B     165-4222     RH Plate Assembly     1    
B     165-4225     LH Plate Assembly     1    
A     165-4232     Plate Assembly     1    
    8T-4195     Bolt     9    
    6V-7744     Locknut     6    
    7X-7729     Washer     15    Rework Procedure
Illustration 1 g00679473
Drill three holes. Tap M10 by 1.5 threads in the rear frame plate. You should use illustration 1.
Illustration 2 g00679491
Mark the four holes. Mark two holes on each side of the frame. You should use the dimensions in illustration 2.
Illustration 3 g00679489
Install plate assembly A to the frame. You should use the hardware in the chart.
Align the mounting holes in plate assemblies B so that the mounting holes line up with the marks on the frame.Drill four 12 mm (0.4724 inch) holes in the frame. Install plate assemblies B. You should use illustration 3. You should use the hardware in the chart.